Production of nanoarchitectonics corncob activated carbon as electrode material for enhanced supercapacitor performance

Corncob was utilized as a low-grade and abundant material for the production of activated carbon through impregnation with potassium carbonate (K2CO3) at different ratios (1:1 to 1:3). The impregnated samples were activated at different temperatures (500 degrees C to 800 degrees C) and activated carbons were used to fabricate electrodes for energy storage. The results revealed that increasing activation temperature and K2CO3 tailored the surface area (489-884 m2/g), morphological, and topography of the activated carbon to propagate higher energy storage via a predominantly electric double layer (EDL) mechanism. The capacitive performance of the materials obtained at different temperatures is in the order of 650 degrees C > 500 degrees C > 800 degrees C. In 3-electrode cells, a specific capacitance of 325 F/g was reached at a 5 mV/s scan rate. The energy retention and columbic efficiency after 10,000 charge/ discharge cycles were maintained at 88 % and 100 %, respectively. The corncob activated carbon material presented specific energy of 9.9 Wh/kg at 0.25 A/g, which is higher than many reported studies on activated carbon supercapacitors under similar conditions.