Evaluation of melamine-modified urea-formaldehyde resins as particleboard binders

被引：48

作者：

No, B. Young ^{[1
]}

Kim, Moon G. ^{[1
]}

机构：

[1] Mississippi State Univ, Coll Forest Resources, Dept Forest Prod, Mississippi State, MS 39762 USA

来源：

JOURNAL OF APPLIED POLYMER SCIENCE | 2007年 / 106卷 / 06期

关键词：

urea-melamine-formaldehyde resins; urea-formaldehyde; resins; particleboard; formaldehyde emission;

D O I：

10.1002/app.26770

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Particleboards bonded with 6 and 12% melamine-modified urea-formaldehyde (UMF) resins were manufactured using two different press temperatures and press times and the mechanical properties, water resistance, and formaldehyde emission (FE) values of boards were measured in comparison to a typical urea-formaldehyde (UF) resin as control. The formaldehyde/(urea + melamine) (F/(U + M)) mole ratio of UMF resins and F/U mole ratio of UF resins were 1.05, 1.15, and 1.25 that encompass the current industrial values near 1.15. UMF resins exhibited better physical properties, higher water resistance, and lower FE values of boards than UF resin control for all F/(U + M) mole ratios tested. Therefore, addition of melamine at these levels can provide lower FE and maintain the physical properties of boards. (C) 2007 Wiley Periodicals, Inc. J Appl Polym Sci 106: 4148-4156, 2007

引用

页码：4148 / 4156

页数：9

共 50 条

[1] Evaluation of melamine-modified urea-formaldehyde resins as particleboard binders
No, B. Young
Kim, Moon G.
[J]. Journal of Applied Polymer Science, 2007, 106 (06): : 4148 - 4156
[2] Evaluation of melamine-modified urea-formaldehyde resin binders for particleboard
Oh, YS
[J]. FOREST PRODUCTS JOURNAL, 1999, 49 (11-12) : 31 - 34
[3] Thermal behaviour of melamine-modified urea-formaldehyde resins
Siimer, Kadri
Kaljuvee, Tiit
Pehk, Tonis
Lasn, Ilmar
[J]. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2010, 99 (03) : 755 - 762
[4] Curing of low level melamine-modified urea-formaldehyde particleboard binder resins studied with dynamic mechanical analysis (DMA)
No, BY
Kim, MG
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 97 (01) : 377 - 389
[5] Curing of low level melamine-modified urea-formaldehyde particleboard binder resins studied with dynamic mechanical analysis (DMA)
No, B. Young
Kim, Moon G.
[J]. Journal of Applied Polymer Science, 2005, 97 (01): : 377 - 389
[6] Thermal behaviour of melamine-modified urea–formaldehyde resins
Kadri Siimer
Tiit Kaljuvee
Tõnis Pehk
Ilmar Lasn
[J]. Journal of Thermal Analysis and Calorimetry, 2010, 99 : 755 - 762
[7] Evaluation of melamine-modified urea-formaldehyde resin for plywood flooring adhesive application
Oh, Yong-Sung
Kim, Kyung-Hee Kim
[J]. Scientia Forestalis/Forest Sciences, 2011, (90): : 199 - 203
[8] Evaluation of Melamine-Modified Urea-Formaldehyde Resin for Plywood Flooring Adhesive Application
Oh, Yong-Sung
Kim, Kyung-Hee
[J]. SCIENTIA FORESTALIS, 2011, 39 (90): : 199 - 203
[9] The fire-retardant properties of the melamine-modified urea-formaldehyde resins mixed with ammonium polyphosphate
Ma, Xing-Xia
Wu, Yu-Zhang
Zhu, Hai-Long
[J]. JOURNAL OF WOOD SCIENCE, 2013, 59 (05) : 419 - 425
[10] Thermal analysis study of viscoelastic properties and activation energy of melamine-modified urea-formaldehyde resins
Kim, Sumin
Kim, Hyun-Joong
Kim, Hee-Soo
Lee, Young-Kyu
Yang, Han-Seung
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2006, 20 (08) : 803 - 816

← 1 2 3 4 5 →