EVALUATION OF COMBUSTION AND EMISSIONS USING BIODIESEL AND BLENDS WITH KEROSENE IN A LOW NOx GAS TURBINE COMBUSTOR

Biofuels offer reduced CO(2) emissions for both industrial and aero gas turbines. Industrial applications are more practical due to low temperature waxing problems at altitude. Any use of biofuels in industrial gas turbines must also achieve low NOx and this paper investigates the use of biofuels in a low NOx radial swirler, as used in some industrial low NOx gas turbines. A waste cooking oil derived methyl ester biodiesel (WME) has been tested on a radial swirler industrial low NOx gas turbine combustor under atmospheric pressure and 600K. The pure WME and its blends with kerosene, B20 and B50 (WME:kerosene= 20:80 and 50:50 respectively), and pure kerosene were tested for gaseous emissions and lean extinction as a function of equivalence ratio. The co-firing with natural gas (NG) was tested for kerosene/biofuel blends B20 and B50. The central fuel injection was used for liquid fuels and wall injection was used for NG. The experiments were carried out at a reference Mach number of 0.017. The inlet air to the combustor was heated to 600K. The results show that B20 produced similar NOx at an equivalence ratio of similar to 0.5 and a significant low NOx when the equivalence ratio was increased comparing with kerosene. B50 and B100 produced higher NOx compared to kerosene, which indicates deteriorated mixing due to the poor volatility of the biofuel component. The biodiesel lower hydrocarbon and CO emissions than kerosene in the lean combustion range. The lean extinction limit was lower for B50 and B100 than kerosene. It is demonstrated that B20 has the lowest overall emissions. The co-firing with NG using B20 and B50 significantly reduced NOx and CO emissions.