Optimization of the coordination-insertion ring-opening polymerization of poly(p-dioxanone) by programmed decreasiniz reaction temperatures

The optimization of the synthesis of poly(p-dioxanone), by ring-opening polymerization with tin II bis(2-ethylhexanoic acid) as the catalyst, was conducted by a new method in which programmed decreasing reaction temperatures were employed. The results were compared with those obtained for polymerization reactions performed at constant temperatures in the 80-180 degrees C range. In the novel method, the temperature was gradually reduced, as the reaction proceeded, to maintain a maximum polymerization rate and monomer conversion as the monomer was consumed. The experiments performed at constant temperatures confirmed previous reports that the bulk polymerization of 1,4-dioxan-2-one is an equilibrium polymerization reaction. With increasing polymerization temperature, the initial rate of polymerization increased, but the monomer conversion, reaching equilibrium, decreased. High conversions were obtained at low temperatures and long reaction times. Therefore, reducing the reaction temperature, to ensure working conditions that guaranteed the maximum polymerization rate and monomer conversion, could optimize the polymerization process. These conditions were calculated under the assumption of equilibrium polymerization reaction kinetics. With our proposed method, a 71% conversion was achieved in half the time needed when the polymerization was performed at a constant temperature of 120 degrees C. Similarly, a 78% conversion was obtained with our proposed method in only a third of the time employed when the reaction was carried out at a constant temperature of 80 degrees C. Our method guarantees high conversions in shorter times and a gradual reduction of the polymerization temperature. (c) 2005 Wiley Periodicals, Inc.