Influence of Form Factor of the Cutting Edge on Tool Life during Finishing Milling

被引：17

作者：

Fulemova, Jaroslava ^{[1
]}

Rehor, Jan ^{[1
]}

机构：

[1] Univ West Bohemia Pilsen, Univ 8, Plzen 30614, Czech Republic

来源：

25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 | 2015年 / 100卷

关键词：

form factor; tool life; milling; insert; stainless steel;

D O I：

10.1016/j.proeng.2015.01.420

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

The article is focused on the influence of the cutting edge form factor, which is usually marked as K, on tool life and roughness of machined surface during finishing milling. The K factors were 0.55, 0.6, 1.6 and 2.5 and were made by drag finishing method. The tool edge rounding was 15 mu m. There was used a cutter head with just one indexable insert for finishing machining. The article can answer to question, if the K factor can help to increase the tool performance, because the influence of the asymmetrical form factor will be compared with symmetric form factor, it means K = 1. Tool edge was prepared by the technology of drag finishing.

引用

页码：682 / 688

页数：7

共 50 条

[1] Influence of tool edge form factor and cutting parameters on milling performance
Zhao, Xuefeng
Qin, Hao
Feng, Zhiguo
[J]. ADVANCES IN MECHANICAL ENGINEERING, 2021, 13 (04)
[2] Research on Cutting Edge form Factor of Milling Tool after Drag Finishing Preparation Based on Discrete Element Method
Zhou, Lihong
Wang, Yongguo
Lv, Dejin
[J]. MACHINES, 2024, 12 (04)
[3] Influence of Cutting Edge Radius on Tool Life in Milling Inconel 718
Celaya, A.
Pereira, O.
Gonzalez, H.
Gomez-Escudero, G.
Fernandez-Lucio, P.
Fernandez-Valdivielso, A.
Lopez de lacalle, L. N.
[J]. PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
[4] Effect of cutting edge form factor (K-factor) on the performance of a face milling tool
Padmakumar, M.
Pradeep, Shiva N.
[J]. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2020, 31 : 305 - 313
[5] INCREASING TOOL LIFE THROUGH ADJUSTMENT OF CUTTING EDGE AND TOOLPATH DURING MILLING OF INCONEL 718
Vavruska, P.
Maly, J.
Novotny, A.
[J]. MM SCIENCE JOURNAL, 2022, 2022 : 6283 - 6288
[6] THE CUTTING EDGE OF TOOL LIFE
GILMORE, RC
[J]. WOOD & WOOD PRODUCTS, 1985, 90 (07): : 59 - 60
[7] Influence of cutting fluid on tool edge temperature in end milling titanium alloy
Tanaka, Ryutaro
Hosokawa, Akira
Furumoto, Tatsuaki
Okada, Masato
Ueda, Takashi
[J]. JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2015, 9 (05):
[8] Influence of the Cutting Edge Radius and the Cutting Edge Preparation on Tool Life and Cutting Forces at Inserts with Wiper Geometry
Fulemova, Jaroslava
Janda, Zdenek
[J]. 24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 565 - 573
[9] Influence of thermal and mechanical shocks to cutting edge tool life
Cep, Robert
Ocenasova, Lenka
Novakova, Jana
Kouril, Karel
Valicek, Jan
Barisic, Branimir
[J]. World Academy of Science, Engineering and Technology, 2009, 56 : 292 - 295
[10] Influence of cutting-edge radius by an edge-honing process on the cutting tool life and coating
Kwak, Yein
Bae, Yeung Ho
Kurniawan, Rendi
Chen, Jielin
Xu, Moran
Saood, Ali
Ko, Tae Jo
[J]. Journal of Mechanical Science and Technology, 2024, 38 (10) : 5595 - 5604

← 1 2 3 4 5 →