The effect of copper addition on the structure and strength of an Al-Li alloy

被引：6
|
作者：
Kabisch, O
Gille, W
Krol, J
机构：
[1] Martin Luther Universitat Halle Wittenberg, D-06120 Halle, Germany
[2] Polish Acad Sci, A Krupkowski Inst Met & Mat Sci, PL-30059 Krakow, Poland
来源：
MATERIALS & DESIGN | 1997年 / 18卷 / 4-6期
关键词：
copper; AL-Li; structure; strength;
D O I：
10.1016/S0261-3069(97)00080-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study the effect of copper addition on the structure, precipitation kinetics and hardness in the Al-Li and Al-Li-Cu alloys aged at 200 degrees C was investigated. The structures of precipitates were studied using X-ray-small-angle-scattering (XSAS) and transmission electron microscopy (TEM) methods. The changes in the structure parameter (Rg) of both alioys was calculated using two methods, the Guinier approximation and correlation function gamma(r). By use of a plot of r gamma(r) the distribution law of the T-1 disc thickness was obtained and the coexisting spherical particles of delta' were estimated. Two types of delta' precipitates of approximately 2 nm size and above 8 nm and the T-1 precipitates of thickness between 3 and 4 nm were observed. (C) 1998 Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：385 / 388
页数：4
相关论文
共 50 条
  • [1] Stretch strength of Al-Li alloy sheet
    Sato, K
    Sakamoto, T
    Sawa, Y
    Yokoyama, T
    Fujimoto, S
    FRACTURE AND STRENGTH OF SOLIDS, PTS 1 AND 2: PT 1: FRACTURE MECHANICS OF MATERIALS; PT 2: BEHAVIOR OF MATERIALS AND STRUCTURE, 1998, 145-9 : 841 - 846
  • [2] STRENGTH DIFFERENTIAL IN AL-LI ALLOY-8090
    PRASAD, NE
    MALAKONDAIAH, G
    RAO, PR
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 150 (02): : 221 - 229
  • [3] Enhancement effect of Li addition on nitriding reaction and combustion of Al-Li alloy in N2
    Xu, Dunhui
    Li, Shengji
    Huang, Xuefeng
    Li, Heping
    Wang, Fang
    FUEL, 2024, 361
  • [4] Effect of Sc Addition on High-Temperature Oxidation Performance of Al-Li Alloy
    Zhu, Baosong
    Le, Qichi
    Ren, Liang
    Zhou, Xiong
    Hou, Xianzhong
    Li, Dandan
    Bao, Lei
    CRYSTALS, 2023, 13 (01)
  • [5] Effect of temperature on the fracture mechanisms of 8090 Al-Li alloy and 8090 Al-Li/SiC composite
    González, C
    Martín, A
    Llorca, J
    SCRIPTA MATERIALIA, 2004, 51 (11) : 1111 - 1115
  • [6] EFFECT OF SCRATCHES ON THE FATIGUE BEHAVIOR OF AN AL-LI ALLOY
    INCHEKEL, A
    TALIA, JE
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1994, 17 (05) : 501 - 507
  • [7] THE EFFECT OF TEMPERATURE ON THE YIELD STRESS OF AL-LI ALLOY
    FURUKAWA, M
    MIURA, Y
    NEMOTO, M
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1985, 26 (06): : 414 - 422
  • [8] Effect of impurities and Ce addition on intrinsic and extrinsic toughening levels of 8090 Al-Li alloy
    Meng, Liang
    Zheng, Xiulin
    Jinshu Xuebao/Acta Metallurgica Sinica, 1997, 33 (08):
  • [9] Effect and mechanism of Li content on the corrosion resistance of Al-Li alloy
    Han, Chao
    Yu, Mei
    Xiao, Jian
    Yang, Zhong
    Zhao, Zhenjiang
    Jia, Xuejiao
    Li, Songmei
    Liu, Jianhua
    CORROSION SCIENCE, 2025, 246
  • [10] Strength distribution of fatigue crack initiation sites in an Al-Li alloy
    Zhai, T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (10): : 3139 - 3147
12345