Fabrication of Cu2ZnSnS4 solar cells by sulfurization of evaporated precursors

被引：39

作者：

Biccari, Francesco ^{[1
]}

Chierchia, Rosa ^{[1
]}

Valentini, Matteo ^{[1
]}

Mangiapane, Pietro ^{[1
]}

Salza, Enrico ^{[1
]}

Malerba, Claudia ^{[1
,2
,3
]}

Ricardo, Cristy Leonor Azanza ^{[2
,3
]}

Mannarino, Loredana ^{[4
]}

Scardi, Paolo ^{[2
,3
]}

Mittiga, Alberto ^{[1
]}

机构：

[1] ENEA, Casaccia Res Ctr, Via Anguillarese 301, I-00123 Rome, Italy

[2] Univ Trent, Dept Mat Engn, I-38123 Trento, Italy

[3] Univ Trent, Ind Technologies, I-38123 Trento, Italy

[4] FN SpA, I-15062 Alessandria, Italy

来源：

EUROPEAN MATERIALS RESEARCH SOCIETY CONFERENCE SYMPOSIUM: ADVANCED INORGANIC MATERIALS AND CONCEPTS FOR PHOTOVOLTAICS | 2011年 / 10卷

关键词：

CZTS; back contact; molybdenum; MoS2;

D O I：

10.1016/j.egypro.2011.10.175

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Cu2ZnSnS4 (CZTS) is a promising material for the production of thin film photovoltaic modules. In this paper we report on the fabrication and characterization of ZnO/CdS/CZTS/Mo solar cells. The CZTS absorber was grown by sulfurization of a precursor composed of a multilayer of ZnS, Sn and Cu. The CZTS structural, compositional and electronic properties were investigated by XRD, SEM-EDS, Raman spectroscopy and conductivity and mobility measurements. Solar cells with the structure ZnO/CdS/CZTS/Mo were produced and fully characterized. The problems connected to the back contact are investigated and discussed. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of Organizers of European Materials Research Society (EMRS) Conference: Symposium on Advanced Inorganic Materials and Concepts for Photovoltaics.

引用

页码：187 / 191

页数：5

共 50 条

[1] Cu2ZnSnS4 solar cells prepared by sulfurization of sputtered ZnS/SniCuS precursors
Li, Zhi-Shan
Wang, Shu-Rong
Jiang, Zhi
Yang, Min
Lu, Yi- Lei
Liu, Si-Jia
Zhao, Qi-Chen
Hao, Rui-Ting
PHYSICA B-CONDENSED MATTER, 2016, 502 : 56 - 60
[2] Thermally evaporated Cu2ZnSnS4 solar cells
Wang, K.
Gunawan, O.
Todorov, T.
Shin, B.
Chey, S. J.
Bojarczuk, N. A.
Mitzi, D.
Guha, S.
APPLIED PHYSICS LETTERS, 2010, 97 (14)
[3] Fabrication of Cu2ZnSnS4 absorbers by sulfurization of Sn-rich precursors
Ge, Jie
Yu, Wenlei
Cao, Hong
Jiang, Jinchun
Ma, Jianhua
Yang, Lihong
Yang, Pingxiong
Hu, Zhigao
Chu, Junhao
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2012, 209 (08): : 1493 - 1497
[4] Cu2ZnSnS4 Electrodeposition by Sulfurization of Metallic Precursors
Perelstein, G.
Valdes, M.
Vazquez, M.
SELECTED PROCEEDINGS FROM THE 232ND ECS MEETING, 2017, 80 (10): : 703 - 710
[5] Influence of sulfurization pressure on Cu2ZnSnS4 thin films and solar cells prepared by sulfurization of metallic precursors
He, Jun
Sun, Lin
Chen, Ye
Jiang, Jinchun
Yang, Pingxiong
Chu, Junhao
JOURNAL OF POWER SOURCES, 2015, 273 : 600 - 607
[6] Preparation of Cu2ZnSnS4 thin films by sulfurization of metallic precursors evaporated with a single source
Jiang, Xin
Shao, Le-Xi
Zhang, Jun
Li, Da
Xie, Wei
Zou, Chang-Wei
Chen, Jian-Min
SURFACE & COATINGS TECHNOLOGY, 2013, 228 : S408 - S411
[7] Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of E-B evaporated precursors
Katagiri, H
Sasaguchi, N
Hando, S
Hoshino, S
Ohashi, J
Yokota, T
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1997, 49 (1-4) : 407 - 414
[8] Fabrication of Cu2ZnSnS4 films by sulfurization of Cu/ZnSn/Cu precursor layers in sulfur atmosphere for solar cells
Chalapathy, R. B. V.
Jung, Gwang Sun
Ahn, Byung Tae
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (12) : 3216 - 3221
[9] Optimization of precursor deposition for evaporated Cu2ZnSnS4 solar cells
Hongtao Cui
Wei Li
Xiaolei Liu
Ning Song
Chang-Yeh Lee
Fangyang Liu
Xiaojing Hao
Applied Physics A, 2015, 118 : 893 - 899
[10] Optimization of precursor deposition for evaporated Cu2ZnSnS4 solar cells
Cui, Hongtao
Li, Wei
Liu, Xiaolei
Song, Ning
Lee, Chang-Yeh
Liu, Fangyang
Hao, Xiaojing
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2015, 118 (03): : 893 - 899

← 1 2 3 4 5 →