Fracture toughness and bridging law of 3D woven composites

被引：0
|
作者：
Tamuzs, V [1 ]
Tarasovs, S [1 ]
机构：
[1] Latvian State Univ, Inst Polymer Mech, LV-1063 Riga, Latvia
来源：
FRACTURE OF POLYMERS, COMPOSITES AND ADHESIVES II | 2003年 / 32卷
关键词：
fracture toughness; delamination; 3D composite; bridging law; crack opening displacement;
D O I：
10.1016/S1566-1369(03)80121-8
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
In the paper, the methodology of measuring G(1c) by using DCB specimens in the presence of large-scale bridging is adapted for investigating the delamination in 3D woven composites. The main novelties introduced in the DCB testing concern a) the loading device, b) the specimen geometry, c) the measurement scheme, and d) the determination of G(1c) and the bridging law from experimental data. The geometry-independent material characteristic G(1c) as a function of the initial crack opening displacement (ICOD) is introduced. Typical values of the delamination fracture toughness of 3D glass and carbon composites are presented.
引用
收藏
页码：515 / 524
页数：10
相关论文
共 50 条
  • [1] Investigation on the in situ interfacial Mode II fracture toughness of the 3D woven composites
    Zong, Qingsong
    Huang, Jinzhao
    Ding, Junfeng
    Guo, Licheng
    COMPOSITES SCIENCE AND TECHNOLOGY, 2025, 265
  • [2] Interlaminar toughness characterisation of 3D woven carbon fibre composites
    Fishpool, D. T.
    Rezai, A.
    Baker, D.
    Ogin, S. L.
    Smith, P. A.
    PLASTICS RUBBER AND COMPOSITES, 2013, 42 (03) : 108 - 114
  • [3] Fracture toughness of woven textile composites
    Xu, Wu
    Waas, Anthony M.
    ENGINEERING FRACTURE MECHANICS, 2017, 169 : 184 - 188
  • [4] A mesoscale in situ method for assessing fracture toughness of intra-yarn and interface in 3D woven composites
    Sun, Ruijian
    Li, Zhixing
    Guo, Licheng
    Yu, Hongjun
    Zhang, Li
    Zong, Qingsong
    COMPOSITES SCIENCE AND TECHNOLOGY, 2022, 224
  • [5] Investigating the translaminar fracture toughness of 3D printed semi-woven and non-woven continuous carbon fibre composites
    Huang, Cheng
    Joosten, Mathew W.
    COMPOSITE STRUCTURES, 2023, 306
  • [6] 3D printing of biomimetic composites with improved fracture toughness
    Jia, Zian
    Wang, Lifeng
    ACTA MATERIALIA, 2019, 173 : 61 - 73
  • [7] Modelling of fracture strength and toughness of 2D and 3D composites
    Yang, Bo
    Su, Yang
    Wei, Qiang
    Li, Zongze
    Fourmeau, Marion
    Zhao, Libin
    Huang, Cheng
    Hu, Ning
    Nelias, Daniel
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 258
  • [8] Finite element modeling on fracture toughness of 3D angle-interlock woven carbon/epoxy composites at microstructure level
    Siddique, Amna
    Sun, Baozhong
    Gu, Bohong
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2021, 28 (08) : 849 - 860
  • [9] The correlation framework: Bridging the gap between modeling and analysis for 3D woven composites
    Mendoza, Arturo
    Schneider, Julien
    Parra, Estelle
    Roux, Stephane
    COMPOSITE STRUCTURES, 2019, 229
  • [10] Effect of fiber hybridization on tensile fracture of 3D woven textile composites
    Pankow, M.
    Riosbass, M.
    Justusson, B.
    Zhang, D.
    Waas, A. M.
    Yen, C. F.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2023, 165
12345