The Influence of Alloying Additives on the Machinability of Austenitic Stainless Steel

被引：2
|
作者：
Tian, Yong [1 ]
Li, Zhuang [2 ]
机构：
[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
[2] Shenyang Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Shenyang 110136, Peoples R China
来源：
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5 | 2011年 / 189-193卷
关键词：
Austenitic Stainless Steel; Alloying Additives; Machinability; Mechanical Properties; LEAD; TOOL; ROUGHNESS;
D O I：
10.4028/www.scientific.net/AMR.189-193.23
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, non-lead machinable austenitic stainless steel was investigated through performing the machinability tests using a CA6164 lathe. The metallurgical properties, machinability and mechanical properties of the developed alloy were compared with those of the conventional austenitic stainless steel 1Cr18Ni9Ti. The results have shown that the inclusions were composed of MnS, Bi, CuO and Ti4C2S2 in the developed non-lead machinable austenitic stainless steel. Bismuth is an important factor to improve the machinability of austenitic stainless steel, and it has a distinct advantage over lead. The presence of alloying additives contributes to the improvement of the machinability of the developed austenitic stainless steel. The mechanical properties of non-lead machinable austenitic stainless steel exhibit a good combination of tensile strength and total elongation, despite the inclusion had a minor detrimental effect on them.
引用
收藏
页码：23 / +
页数：3
相关论文
共 50 条
  • [1] INFLUENCE OF ALLOYING ELEMENTS ON STRESS CORROSION BEHAVIOR OF AUSTENITIC STAINLESS STEEL
    LOGINOW, AW
    BATES, JF
    [J]. CORROSION, 1969, 25 (01) : 15 - &
  • [2] A PRELIMINARY STUDY ON MACHINABILITY OF SUPER AUSTENITIC STAINLESS STEEL
    Polishetty, Ashwin
    Alabdullah, Mohanad Fakhri Abdulqader
    Pillay, Nihal
    Littlefair, Guy
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2015, VOL 2A, 2016,
  • [3] Microstructure and Machinability with Alloying Elements in the 304 Stainless Steel
    Kang, S. S.
    Kim, H. C.
    Lee, J. H.
    Cho, J. R.
    Jung, Y. G.
    Jang, C. H.
    Hwang, H. S.
    [J]. KOREAN JOURNAL OF MATERIALS RESEARCH, 2006, 16 (09): : 584 - 591
  • [4] Machinability of austenitic stainless steel SS303
    O'Sullivan, D
    Cotterell, A
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 124 (1-2) : 153 - 159
  • [5] Effects of free-cutting additives on the machinability of austenitic stainless steels
    Akasawa, T
    Sakurai, H
    Nakamura, M
    Tanaka, T
    Takano, K
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 66 - 71
  • [6] Influence of copper as an alloying element on hydrogen environment embrittlement of austenitic stainless steel
    Michler, Thorsten
    Naumann, Joerg
    Sattler, Erich
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (17) : 12765 - 12770
  • [7] Influence of minor alloying elements on the initial stages of oxidation of austenitic stainless steel materials
    Jussila, P.
    Lahtonen, K.
    Lampimaki, M.
    Hirsimaki, M.
    Valden, M.
    [J]. SURFACE AND INTERFACE ANALYSIS, 2008, 40 (08) : 1149 - 1156
  • [8] Synthesis of austenitic stainless steel powder alloys by mechanical alloying
    Al-Joubori, Ahmed A.
    Suryanarayana, C.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2017, 52 (20) : 11919 - 11932
  • [9] Synthesis of austenitic stainless steel powder alloys by mechanical alloying
    Ahmed A. Al-Joubori
    C. Suryanarayana
    [J]. Journal of Materials Science, 2017, 52 : 11919 - 11932
  • [10] Influence of copper-alloying of austenitic stainless steel on multi-species biofilm development
    Kielemoes, J
    Verstraete, W
    [J]. LETTERS IN APPLIED MICROBIOLOGY, 2001, 33 (02) : 148 - 152
12345