Influences of geometric and dynamic synchronous errors onto machined surface in 5-axis machining center

被引:10
|
作者
Hasegawa, Shogo [1 ]
Sato, Ryuta [1 ]
Shirase, Keiichi [1 ]
机构
[1] Kobe Univ, Dept Mech Engn, Nada Ku, 1-1 Rokko Dai, Kobe, Hyogo 6578501, Japan
关键词
5-axis machining center; Geometric error; Dynamic synchronous error; Machined surface; Simulation; IDENTIFICATION; COMPENSATION; MOTION;
D O I
10.1299/jamdsm.2016jamdsm0071
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Unexpected glitches typically occur on the finished surface machined by the 5-axis machining centers, because of geometric and dynamic synchronous errors of the machine. In this study, actual ball-nosed end milling tests of hemispheres and its finished surface simulations with different geometric errors and different position loop gain of feed drive systems were carried out, in order to clarify the influence of the geometric and dynamic synchronous errors onto machined surface. As the results, it is clarified that the influence of geometric errors onto the machined surface is depending on the relationships between the movement of the axes and the surface geometry. In addition, the dynamic synchronous error also influences the machined surface when the velocity of translational and rotary axes changed rapidly.
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Machined surface error analysis for 5-axis machining
    Lee, YS
    Chang, TC
    [J]. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1996, 34 (01) : 111 - 135
  • [2] Research on Geometric Errors Model And Identification of 5-Axis Machining Center For Processing Turbo Molecular Pump Rotor
    Zhao, Wu
    Liu, Haoran
    Wang, Guoji
    Liu, Lingbing
    [J]. MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 2011, 211-212 : 784 - +
  • [3] Compensating for systematic errors in 5-axis NC machining
    Bohez, ELJ
    [J]. COMPUTER-AIDED DESIGN, 2002, 34 (05) : 391 - 403
  • [4] Machined surface analysis for 5-axis machine tools
    Yamada, Makoto
    Tanaka, Fumiki
    Kondo, Tsukasa
    Kishinami, Takeshi
    [J]. TOWARDS SYNTHESIS OF MICRO - /NANO - SYSTEMS, 2007, (05): : 323 - +
  • [5] Identification of integrated geometric errors of rotary axis and setup position errors for 5-axis machine tools based on machining test
    Huang, Nuodi
    Jin, Yongqiao
    Li, Xiaoyong
    Liang, Liang
    Wu, Shijing
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (5-8): : 1487 - 1496
  • [6] Identification of integrated geometric errors of rotary axis and setup position errors for 5-axis machine tools based on machining test
    Nuodi Huang
    Yongqiao Jin
    Xiaoyong Li
    Liang Liang
    Shijing Wu
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 102 : 1487 - 1496
  • [7] Dynamic Characteristic Analysis and Structural Modification of a 5-axis Horizontal Machining Center Considering Joint Surface
    Shi, Y. G.
    Zhao, X. Y.
    Zeng, L. Q.
    Wang, H. Y.
    Zhang, D. W.
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 513 - 516
  • [8] Position geometric error modeling, identification and compensation for large 5-axis machining center prototype
    Zhong, Gaoyan
    Wang, Chaoqun
    Yang, Shoufeng
    Zheng, Enlai
    Ge, Yanyan
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2015, 89 : 142 - 150
  • [9] DESIGN OF A 5-AXIS MACHINE TOOL CONSIDERING GEOMETRIC ERRORS
    Park, Sung-Ryung
    Yang, Seung-Han
    [J]. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (15-16): : 2484 - 2489
  • [10] Manufactuability analysis for 5-axis sculptured surface machining
    Yang, WY
    Ding, H
    Xiong, YL
    [J]. ICRA '99: IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-4, PROCEEDINGS, 1999, : 2116 - 2121