Effects of secondary phase and grain size on the corrosion of biodegradable Mg-Zn-Ca alloys

被引：184

作者：

Lu, Y. ^{[1
]}

Bradshaw, A. R. ^{[1
]}

Chiu, Y. L. ^{[1
]}

Jones, I. P. ^{[1
]}

机构：

[1] Univ Birmingham, Sch Met & Mat, Birmingham B15 2TT, W Midlands, England

来源：

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | 2015年 / 48卷

基金：

英国工程与自然科学研究理事会;

关键词：

Mg-Zn-Ca; Degradation; Microstructure; Heat treatment; MAGNESIUM ALLOYS; BEHAVIOR;

D O I：

10.1016/j.msec.2014.12.049

中图分类号：

TB3 [工程材料学]; R318.08 [生物材料学];

学科分类号：

0805 ; 080501 ; 080502 ;

摘要：

The bio-corrosion behaviour of Mg-3Zn-0.3Ca (wt.%) alloy in simulated body fluid (SBF) at 37 degrees C has been investigated using immersion testing and electrochemical measurements. Heat treatment has been used to alter the grain size and secondary phase volume fraction; the effects of these on the bio-corrosion behaviour of the alloy were then determined. The as-cast sample has the highest bio-corrosion rate due to niicro-galvanic corrosion between the eutectic product (Mg + Ca2Mg6Zn3) and the surrounding magnesium matrix. The bio-corrosion resistance of the alloy can be improved by heat treatment. The volume fraction of secondary phases and grain size are both key factors controlling the bio-corrosion rate of the alloy. The bio-corrosion rate increases with volume fraction of secondary phase. When this is lower than 0.8%, the dependence of bio-corrosion rate becomes noticeable: large grains corrode more quickly. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：480 / 486

页数：7

共 50 条

[1] EFFECT OF ECAP ON THE MICROSTRUCTURE, MECHANICAL AND CORROSION PROPERTIES OF Mg-Zn-Ca AND Mg-Zn-Ca-Mn BIODEGRADABLE ALLOYS
Koltygin, Andrey
Bazhenov, Viacheslav
Komissarov, Alexander
Khasenova, Regina
Anishchenko, Alexey
Fozilov, Bunyodbek
Bautin, Vasiliy
Seferyan, Alexander
Bilyalov, Azat
[J]. 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 1388 - 1393
[2] DEVELOPMENT OF BIODEGRADABLE MG-ZN-CA ALLOYS FOR BIOMEDICAL APPLICATIONS
Chen, Shuo
Smith, Christopher E.
Xu, Zhigang
Sankar, Jagannathan
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2010, VOL 12, 2012, : 43 - 48
[3] Effects of Ca on microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Ca alloys
Yin, Ping
Li, Nian Feng
Lei, Ting
Liu, Lin
Ouyang, Chun
[J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2013, 24 (06) : 1365 - 1373
[4] Bio-corrosion Resistance of Mg-Zn-Ca Alloys
Li Xuesong
Wang Lidong
Zhao Jianwu
Liu Jiansheng
Wang Limin
[J]. RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (09) : 1905 - 1907
[5] Effects of solidification cooling rate on the corrosion resistance of a biodegradable β-TCP/Mg-Zn-Ca composite
Yuan, Qiang
Huang, Y.
Liu, Debao
Chen, Minfang
[J]. BIOELECTROCHEMISTRY, 2018, 124 : 93 - 104
[6] Effects of Yttrium Addition on Mechanical Properties of Mg-Zn-Ca Alloys as Biodegradable Implant Materials
Jiang, Dong-Mei
Zhang, Zhong-Jun
Liu, Tie-Jun
Pan, Chun-Xiang
[J]. PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MEDICINE AND BIOPHARMACEUTICALS, 2016, : 667 - 672
[7] In vitro corrosion and cytocompatibility of Mg-Zn-Ca alloys coated with FHA
Lan, Weiwei
Li, Jun
Lv, Zhenjun
Liu, Shuang
Liang, Ziwei
Huang, Di
Wei, Xiaochun
Chen, Weiyi
[J]. COLLOIDS AND SURFACES B-BIOINTERFACES, 2024, 238
[8] Corrosion behavior and mechanical properties of Mg-Zn-Ca amorphous alloys
Qin, Fengxiang
Xie, Guoqiang
Dan, Zhenhua
Zhu, Shengli
Seki, Ichiro
[J]. INTERMETALLICS, 2013, 42 : 9 - 13
[9] Degradation of biodegradable implants: The influence of microstructure and composition of Mg-Zn-Ca alloys
Roche, V
Koga, G. Y.
Matias, T. B.
Kiminami, C. S.
Bolfarini, C.
Botta, W. J.
Nogueira, R. P.
Jorge Junior, A. M.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 774 : 168 - 181
[10] Cluster Hardening Effects on Twinning in Mg-Zn-Ca Alloys
Liu, Ruixue
Wang, Jie
Wang, Leyun
Zeng, Xiaoqin
Jin, Zhaohui
[J]. METALS, 2022, 12 (04)

← 1 2 3 4 5 →