The ITER thermal shields for the magnet system: specific design, assembly and structural issues

被引：6
|
作者：
Krasikov, Y
Bykov, V
Carbonare, GD
Boykov, A
Grigoriev, S
Komarov, V
Krylov, V
Labusov, A
Pyrjaev, V
Sorin, V
Saksaganski, G
Tanchuk, V
机构：
[1] ITER IT, Naka, Ibaraki 31101, Japan
[2] DV Efremov Sci Res Inst, St Petersburg 196641, Russia
来源：
FUSION ENGINEERING AND DESIGN | 2003年 / 66-68卷
关键词：
thermal shields; finite element analysis; ITER;
D O I：
10.1016/S0920-3796(03)00271-0
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
The thermal shield system provides the required reduction of both total and local thermal loads to the cold structures operating at 4.5 K. The most complex thermal shield component is the vacuum vessel (W) thermal shield (VVTS) located in a narrow gap between the toroidal field coil system and the W. The paper concentrates on specific thermal shield issues, such as the VVTS over-all design including inboard support system and neutral beam ports, details of the VVTS sub-assembly and assembly procedures, section joints, design and efficiency of thermal shield component interfaces, etc. It also presents results of cryovacuum, thermal-hydraulic, seismic and structural analyses. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：1049 / 1054
页数：6
相关论文
共 50 条
  • [1] The thermal shields for the ITER magnet system: thermal, structural and assembly aspects
    Bykov, V
    Nishikawa, A
    Dalle Carbonare, G
    Alekseev, A
    Grigoriev, S
    Krasikov, Y
    Krylov, V
    Labusov, A
    Nakahira, M
    FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 177 - 182
  • [2] The ITER thermal shields for the magnet system: Design evolution and analysis
    Bykov, V
    Krasikov, Y
    Grigoriev, S
    Komarov, V
    Krylov, V
    Labusov, A
    Pyrjaev, V
    Chiocchio, S
    Smirnov, V
    Sorin, V
    Tanchuk, V
    FUSION ENGINEERING AND DESIGN, 2005, 75-79 : 155 - 162
  • [3] Design approach of the vacuum vessel and thermal shields towards assembly at the ITER-site
    Utin, Yu.
    Ioki, K.
    Bachmann, Ch.
    Chung, W.
    Her, N. I.
    Johnson, G.
    Jones, L.
    Jun, C. H.
    Kim, B. C.
    Kuzmin, E.
    Macklin, B.
    Sannazzaro, G.
    Shaw, R.
    Wang, X.
    Yu, J.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (7-11) : 1887 - 1891
  • [4] DESIGN AND DEVELOPMENT OF THE ITER MAGNET SYSTEM
    THOME, RJ
    CRYOGENICS, 1994, 34 : 39 - 46
  • [5] Design & development of the ITER magnet system
    Thome, Richard J.
    Cryogenics, 1994, 34 (Suppl) : 39 - 46
  • [6] ITER magnet design criteria and their impact on manufacturing and assembly
    Jong, C. T. J.
    Mitchell, N.
    Knaster, J.
    22ND IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 2007, : 108 - 111
  • [7] Simplified thermal model of the ITER magnet system
    Furci, Hernan
    Luongo, Cesar
    CRYOGENICS, 2014, 63 : 241 - 254
  • [8] Structural design and optimization of cryostat feedthrough for ITER magnet
    Wang, Jianqing
    Song, Yuntao
    Wu, Songtao
    Zhang, Yuanbin
    He Jishu/Nuclear Techniques, 2006, 29 (04): : 271 - 275
  • [9] Structural assessment of the ITER magnet system gravity supports
    Fu, Youkun
    Gallix, Remy
    Jong, Cornelis
    Savary, Frederic
    FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) : 1389 - 1392
  • [10] Updating the design of the feeder components for the ITER magnet system
    Yoshida, K
    Takahashi, Y
    Isono, T
    Mitchell, N
    FUSION ENGINEERING AND DESIGN, 2005, 75-79 : 241 - 247
12345