Effects of fuel cracking on combustion characteristics of a supersonic model combustor

被引:17
|
作者
Zhong, Zhan [1 ]
Wang, Zhenguo [1 ]
Sun, Mingbo [1 ]
机构
[1] Natl Univ Def Technol, Sci & Technol Scramjet Lab, Changsha 410073, Hunan, Peoples R China
基金
中国国家自然科学基金;
关键词
Scramjet; Combustion characteristic; Fuel cracking; Vaporized RP-3; Ethylene; AVIATION KEROSENE; IGNITION; INJECTION; PROPULSION; SIMULATION;
D O I
10.1016/j.actaastro.2015.01.003
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
The compositions of endothermic hydrocarbon fuels in cooling channels of regenerative cooled scramjet engines change along with fuel cracking. To investigate the effect of fuel compositions variation resulting from cracking on the combustion characteristics of supersonic combustors, a series of combustion tests with a wide range of equivalence ratios were conducted in a direct-connected test rig under the inflow conditions of Ma=3.46 and T-t=1430 K. The combustion characteristics of room temperature ethylene and vaporized China no. 3 aviation kerosene (RP-3) with negligible cracking weie analyzed and compared based on the measured static pressure distributions along the combustor wall, fuel specific impulses, flame luminosity images and the one-dimensional average flow parameter distributions calculated by a quasi-one-dimensional data analysis method. The experimental results showed that the differences between the combustion characteristics of vaporized RP-3 and ethylene were sensitive to equivalence ratio. Under low equivalence ratios, vaporized RP-3 and ethylene had remarkably different combustion characteristics. Ethylene had an obvious higher static pressure level, specific impulse and combustion efficiency than vaporized RP-3 for its higher activity. The difference of combustion performance between vaporized RP-3 and ethylene was narrowed with the increase of equivalence ratio and the corresponding combustion condition improvement. When the equivalence ratio increased to 1.09, vaporized RP-3 and ethylene had tiny difference in combustion performance. (C) 2015 IAA. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 50 条
  • [1] Mixing and Combustion Characteristics of Kerosene in a Model Supersonic Combustor
    Kumaran, K.
    Babu, V.
    JOURNAL OF PROPULSION AND POWER, 2009, 25 (03) : 583 - 592
  • [2] Combustion characteristics of a supersonic combustor model for a JAXA flight experiment
    Takahashi, Masahiro
    Kobayashi, Kan
    Tomioka, Sadatake
    CEAS SPACE JOURNAL, 2023, 15 (06) : 827 - 844
  • [3] Combustion characteristics of a supersonic combustor model for a JAXA flight experiment
    Masahiro Takahashi
    Kan Kobayashi
    Sadatake Tomioka
    CEAS Space Journal, 2023, 15 : 827 - 844
  • [4] Experimental Study of Vitiation Effects on Combustion Characteristics of a Supersonic Combustor
    Wang, Yanhua
    Song, Wenyan
    Shi, Deyong
    Fu, Qiang
    Wang, Yuhang
    COMBUSTION SCIENCE AND TECHNOLOGY, 2017, 189 (09) : 1500 - 1509
  • [5] Numerical investigation on the combustion characteristics of aluminum powder fuel in a supersonic cavity-based combustor
    Feng, Yanbin
    Luo, Shibin
    Song, Jiawen
    Xia, Kunxiong
    Xu, Dequan
    APPLIED THERMAL ENGINEERING, 2023, 221
  • [6] Pulse combustion of hydrocarbon fuels in a supersonic model combustor
    Zhang, T.-C. (taichang@imech.ac.cn), 1600, Journal of Propulsion Technology (35):
  • [7] Numerical simulation of the supersonic combustion of kerosene in a model combustor
    Rajasekaran, A.
    Satishkumar, G.
    Babu, V.
    PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 2009, 9 (01): : 30 - 42
  • [8] Effects of injectors locations on kerosene combustion in supersonic combustor
    Wang, H.-L. (whlwowo@sina.com), 1600, Journal of Propulsion Technology (33):
  • [9] The Effect of Fuel Injection Location on Supersonic Hydrogen Combustion in a Cavity-Based Model Scramjet Combustor
    Jeong, Eunju
    O'Byrne, Sean
    Jeung, In-Seuck
    Houwing, A. F. P.
    ENERGIES, 2020, 13 (01)
  • [10] Investigation of vaporized kerosene injection and combustion in a supersonic model combustor
    Fan, XJ
    Yu, G
    Li, JG
    Zhang, XY
    Sung, CJ
    JOURNAL OF PROPULSION AND POWER, 2006, 22 (01) : 103 - 110