Effects of Loading Rate Range on Mechanical and Microstructural Properties of Dynamically Compacted Iron Powder

被引:2
|
作者
Namazi, N. [1 ]
Alitavoli, M. [1 ]
Babaei, H. [1 ]
机构
[1] Univ Guilan, Dept Mech Engn, POB 3756-41635, Rasht, Iran
关键词
Loading rate; Dynamic compaction; Microstructural analysis; Mechanical properties; Iron powder; HIGH-VELOCITY COMPACTION; CONSOLIDATION; PARAMETERS;
D O I
10.1007/s12540-020-00653-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this paper, an attempt was made to investigate the effects of dynamic loading rate on the properties of iron powder with a focus on the microstructural characteristics of the compacted material. Dynamic compaction tests were performed using an instrumented die equipped with a load cell under the low loading rate ranging from 20 to 44 kN/ms in a drop hammer and the high loading rate ranging from 308 to 665 kN/ms in a one-stage light gas gun. Optical and scanning electron microscopes, diametric compression test, and Vickers hardness measurement were used to investigate microstructural and mechanical properties of the green compacts. The obtained results show that the range of loading rate completely changes the behavior of the powder by changing the number and velocity of the propagating stress waves. Comparison of the properties of specimens with equivalent density compacted under two ranges of loading rates indicates that the high range significantly increases the strength and hardness, distributes stress and porosity more uniformly, and reduces initiation and growth of inter-particle cracks as well as the compaction force required to achieve a specific density.
引用
收藏
页码:4097 / 4109
页数:13
相关论文
共 50 条
  • [1] Effects of Loading Rate Range on Mechanical and Microstructural Properties of Dynamically Compacted Iron Powder
    N. Namazi
    M. Alitavoli
    H. Babaei
    [J]. Metals and Materials International, 2021, 27 : 4097 - 4109
  • [3] Analysis of density and mechanical properties of high velocity compacted iron powder
    Wang, Jianzhong
    Yin, Haiqing
    Qu, Xuanhui
    [J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2009, 22 (06) : 447 - 453
  • [4] Austempered Compacted Graphite Iron - Influence of austempering temperature and time on microstructural and mechanical properties
    Ghasemi, Rohollah
    Hassan, Inamul
    Ghorbani, Arvin
    Dioszegi, Attila
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 767
  • [5] Microstructural and mechanical properties of biodegradable iron foam prepared by powder metallurgy
    Capek, Jaroslav
    Vojtech, Dalibor
    Oborna, Adela
    [J]. MATERIALS & DESIGN, 2015, 83 : 468 - 482
  • [6] The Effect of Powder Loading and Binder System on the Mechanical, Rheological and Microstructural Properties of 4605 Powder in MIM Process
    Vahid Momeni
    Ali Askari
    Mohammad Hossein Alaei
    Amir Hossein Rahimi
    Khanali Nekouee
    Hadi Zangi
    [J]. Transactions of the Indian Institute of Metals, 2019, 72 : 1245 - 1254
  • [7] The Effect of Powder Loading and Binder System on the Mechanical, Rheological and Microstructural Properties of 4605 Powder in MIM Process
    Momeni, Vahid
    Askari, Ali
    Alaei, Mohammad Hossein
    Rahimi, Amir Hossein
    Nekouee, Khanali
    Zangi, Hadi
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (05) : 1245 - 1254
  • [8] Effects of Cement Treatment on Microstructural, Hydraulic, and Mechanical Properties of Compacted Soils: Characterization and Modeling
    Ranaivomanana, Harifidy
    Razakamanantsoa, Andry
    Amiri, Ouali
    [J]. INTERNATIONAL JOURNAL OF GEOMECHANICS, 2018, 18 (09)
  • [9] The mechanical and physical properties of compacted graphite iron
    Shao, S
    Dawson, S
    Lampic, M
    [J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1998, 29 (08) : 397 - 411
  • [10] MAGNETIC-PROPERTIES OF DYNAMICALLY COMPACTED GLASSY METAL-POWDER CORES
    HASEGAWA, R
    CLINE, CF
    [J]. JOURNAL OF METALS, 1984, 36 (07): : 66 - 67