Application of amorphous and microcrystalline filler metals for brazing of beryllium with metals

被引：9

作者：

Kalin, BA ^{[1
]}

Fedotov, VT ^{[1
]}

Sevryukov, ON ^{[1
]}

Grigoryev, AE ^{[1
]}

Plyuschev, AN ^{[1
]}

Ivanov, VM ^{[1
]}

Strebkov, YS ^{[1
]}

机构：

[1] RES & DEV INST POWER ENGN, MOSCOW, RUSSIA

来源：

JOURNAL OF NUCLEAR MATERIALS | 1996年 / 233卷

关键词：

D O I：

10.1016/S0022-3115(96)00070-0

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Rapidly solidified (RS) amorphous and microcrystalline ribbon-type brazing filler metals (FMs) represent a promising facility for joining heterogeneous materials together. The advantage results are followed from the homogeneity of element and phase compositions and the strictly specified geometrical dimensions of such FMs. Produced by rapid solidification technology amorphous FM: Zr-Ti-Fe-Be (STEMET(1) 1403) and microcrystalline FMs: Al-Si (STEMET 1501), Cu-Sn-Mn-In-Ni (STEMET 1120) and Cu-Sn-In-Ni (STEMET 1108) were used. Brazing of beryllium with metals (Be + Cu; Be + SS; Be + V) was performed using ribbon-type FMs. Metallographic and microprobe analysis of brazed zones suggested that components of FMs are uniformly distributed, pores and cracks are absent. Tensile strength testing of brazed joints was carried out.

引用

页码：945 / 948

页数：4

共 50 条

[1] Brazing filler metals
Way, Matthew
Willingham, Jack
Goodall, Russell
INTERNATIONAL MATERIALS REVIEWS, 2020, 65 (05) : 257 - 285
[2] Brazing Filler Metals for Joining Refractory Metals
不详
WELDING JOURNAL, 2011, 90 (09) : 64 - 64
[3] WELDING AND BRAZING FILLER METALS
SLAUGHTE.GM
CANONICO, DA
NUCLEAR ENGINEERING AND DESIGN, 1971, 17 (02) : 181 - &
[4] WETTABILITY OF BRAZING FILLER METALS
KELLER, DL
MCDONALD, MM
HEIPLE, CR
JOHNS, WL
HOFMANN, WE
WELDING JOURNAL, 1990, 69 (10) : 31 - 34
[5] AMORPHOUS TI-ZR-BASE METGLAS BRAZING FILLER METALS
RABINKIN, A
LIEBERMANN, H
POUNDS, S
TAYLOR, T
REIDINGER, F
LUI, SC
SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (02): : 399 - 404
[6] HOW TO CHOOSE BRAZING FILLER METALS
WEYMUELLER, CR
WELDING DESIGN & FABRICATION, 1984, 57 (07): : 33 - 39
[7] DEVELOPMENT OF BRAZING FILLER METALS FOR MOLYBDENUM
COLE, NC
SLAUGHTER, GM
NUCLEAR TECHNOLOGY, 1975, 26 (02) : 183 - 191
[8] Flowabilities of filler metals in aluminum brazing
KAWAKATSU I
OSAWA T
1971, 35 (01): : 53 - 57
[9] DEVELOPMENT OF BRAZING FILLER METALS FOR ZIRCALOY
BEAL, RE
SAPERSTE.ZP
WELDING JOURNAL, 1971, 50 (07) : S275 - &
[10] Separation between filler metals and core metals of aluminum brazing sheets
Muramatsu, T
Okada, K
Sekita, S
Habu, R
REWAS'99 GLOBAL SYMPOSIUM ON RECYCLING, WASTE TREATMENT AND CLEAN TECHNOLOGY VOLUME I-III, 1999, : 1073 - 1082

← 1 2 3 4 5 →