Reservoir Characteristics of Tight Sandstone and Sweet Spot Prediction of Dibei Gas Field in Eastern Kuqa Depression, Northwest China

Great progress has been made in the exploration of tight sandstone gas resources in Kuqa depression. Great progress has been made in Dibei structural belt, which proves the previously unproven favorable area for tight sandstone gas. The physical properties, controlling factors, and characteristics of tight sandstone from the Ahe (J(1)a) Formation in the Dibei gas reservoir are analyzed. The results show that the tight sandstone of the J(1)a Formation is mainly feldspar lithic sandstone, with low porosity (average 9.1%) and low permeability (average 0.09 mD). Compaction (average compaction rate 61.9%) reduces porosity more than cementation (average cementation rate 14.3%). Secondary dissolution pores (average thin section porosity is 3.4%) dominate. The homogenization temperature has two peaks; the first peak is 85-110 degrees C, and the other peak is 115-140 degrees C, indicating that oil and gas experienced two filling stages at 12 Ma and 4.5 Ma, respectively. Eodiagenesis, A substage of mesogenetic diagenesis, and B substage of mesogenetic diagenesis happened in the area. Tight sandstone is developed in the B substage of mesogenetic diagenesis. The main controlling factors of diagenesis are: strong dissolution and structural pore increase; oil and gas charging and overpressure. The reservoir forming mode of the Dibei gas reservoir is: crude oil filling in the Late Neogene (12 Ma); reservoir densification in the late deposition of Kangcun Formation (7 Ma), mature natural gas filling in the early deposition of Kuqa Formation (4.5 Ma), and gas reservoir formed after transformation and adjustment in the deposition period of Quaternary (2 Ma). According to this model, it is predicted that the favorable area of the Dibei gas reservoir is in the southeast of the Yinan 2 well. This study provides guidance for the study of tight sandstone gas in other areas of the Kuqa Depression.