Microstructure and Properties of Roller Surface Alloyed by Laser

被引：0
|
作者：
Feng Liang [1 ]
Liu Qi-bin [1 ]
机构：
[1] Guizhou Univ, Coll Mat & Met, Guiyang 550003, Peoples R China
来源：
MATERIALS PROCESSING TECHNOLOGY, PTS 1-3 | 2012年 / 418-420卷
关键词：
Metallurgical roller; Laser alloying; Microstructure; Properties;
D O I：
10.4028/www.scientific.net/AMR.418-420.1808
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To improve the service performance of roller. The surface of roller was alloyed by a 5kW CO2 laser. The Microstructure, hardness and wear resistance were investigated by means of OM, XRD, Micro-hardness Testing Machine and MMS-2A screen display friction tester. The experimental results indicate that excellent metallurgical bonding is obtained between alloying layer and substrate, the main microstructure of laser alloying coating is composed of phases such as gamma-Fe, Fe(Ni,Cr), (Fe,Cr)(7)C-3, MoC, Fe2MoC, WC and SiC etc. The strengthening mode is particle-reinforced mechanism. The corrosion resistance of connection zone is better than that of alloying zone. The average of microhardness value is as high as 718 HV, which is more two times than that of substrate, and the average of wear resistance value of alloying layer is approximately three times larger than that of substrate.
引用
收藏
页码：1808 / 1811
页数：4
相关论文
共 50 条
  • [1] Effect of different contents of CeO2 on microstructure and properties of roller surface alloyed by laser
    Yue, Huaijun
    Liu, Qibin
    Feng, Liang
    ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3, 2012, 217-219 : 2079 - 2082
  • [2] Effect of CeO2 on Microstructure and Hardness of Roller Surface Alloyed by Laser
    Yue, Huaijun
    Liu, Qibin
    MECHANICAL ENGINEERING AND GREEN MANUFACTURING II, PTS 1 AND 2, 2012, 155-156 : 877 - 880
  • [3] MICROSTRUCTURE AND SURFACE-PROPERTIES OF 1016 STEEL LASER SURFACE ALLOYED WITH NI AND CR
    CHANDE, T
    GHOSE, A
    MAZUMDER, J
    JOURNAL OF METALS, 1983, 35 (12): : 85 - 85
  • [4] Microstructure and properties of high chrome steel roller after laser surface melting
    Li, Meiyan
    Wang, Yong
    Han, Bin
    Zhao, Weimin
    Han, Tao
    APPLIED SURFACE SCIENCE, 2009, 255 (17) : 7574 - 7579
  • [5] Microstructure and creep behaviour of laser surface alloyed aluminium
    Das, D.K.
    Paradkar, A.G.
    Mishra, R.S.
    Scripta metallurgica et materialia, 1992, 27 (08): : 1211 - 1214
  • [6] Microstructure of laser-induced surface-alloyed α-Fe
    Dehm, G
    Scheu, C
    Bamberger, M
    Sundararajan, G
    LASER MATERIALS PROCESSING CONFERENCE, PTS 1 & 2: ICALEO '97, 1997, : F128 - F137
  • [7] Microstructure and mechanical properties of laser surface alloyed coatings prepared on cast Ai-Si
    Cai, X
    Yang, X
    Wang, J
    SURFACE ENGINEERING, 1999, 15 (02) : 115 - 118
  • [8] MICROSTRUCTURE AND CREEP-BEHAVIOR OF LASER SURFACE ALLOYED ALUMINUM
    DAS, DK
    PARADKAR, AG
    MISHRA, RS
    SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (08): : 1211 - 1214
  • [9] The microstructure of the surface layer of magnesium laser alloyed with aluminum and silicon
    Dziadon, Andrzej
    Mola, Renata
    Blaz, Ludwik
    MATERIALS CHARACTERIZATION, 2016, 118 : 505 - 513
  • [10] Study on microstructure and mechanical properties of laser melted roller steel
    Wang, G.
    Wang, J.G.
    Zhou, X.C.
    Ma, Y.L.
    Jinshu Rechuli/Heat Treatment of Metals, 2001, 26 (03):
12345