ANALYTICAL LOSS PREDICTION FOR TURBOCHARGER COMPRESSORS

被引：0

作者：

Schneider, M. ^{[1
]}

Buehler, J. ^{[1
]}

Hanna, M. ^{[1
]}

Schiffer, H. -P. ^{[1
]}

Leichtfuss, S. ^{[2
]}

机构：

[1] Tech Univ Darmstadt, Inst Gas Turbines & Aerosp Prop, Otto Berndt Str 2, D-64287 Darmstadt, Germany

[2] Turbo Sci, D-64287 Darmstadt, Germany

来源：

11TH EUROPEAN CONFERENCE ON TURBOMACHINERY: FLUID DYNAMICS AND THERMODYNAMICS | 2015年

关键词：

automotive turbocharger; radial compressor; analytical modelling; performance prediction; loss prediction; two-zone model;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A tool for performance prediction of automotive turbocharger centrifugal compressors is presented. The code is based on analytical models from literature and includes vaneless compressor inlet, impeller, vaneless diffuser and a volute. The impeller exit flow is modelled using a modified two-zone approach which accounts for the interaction of aerodynamic blockage and diffusion. Thermal and pressure losses inside the impeller are computed using different collections of loss models from open literature. The data are used to evaluate the percentage of individual loss mechanisms on the overall losses. The predicted performance is compared with highly resolved numerical simulations and experiments. A correlation for the minimal boundary of the aerodynamic blockage coefficient at different operating points is derived from the numerical results which serves as input to the analytical model.

引用

页数：13

共 50 条

[1] ASSESSING 1D LOSS MODELS FOR THE OFF-DESIGN PERFORMANCE PREDICTION OF AUTOMOTIVE TURBOCHARGER COMPRESSORS
Harley, Peter
Spence, Stephen
Filsinger, Dietmar
Dietrich, Michael
Early, Juliana
[J]. PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 6C, 2013,
[2] Prediction model of mechanical loss in turbocharger
Sakagami, Satoshi
Uemichi, Akane
Yamasaki, Yudai
Kaneko, Shigehiko
[J]. COMODIA 2017 - 9th International Conference on Modeling and Diagnostics for Advanved Engine Systems, 2017,
[3] An evaluation of 1D loss model collections for the off-design performance prediction of automotive turbocharger compressors
Harley, P.
Spence, S.
Early, J.
Filsinger, D.
Dietrich, M.
[J]. 6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013), 2013, 52
[4] Aerodynamic performance of small turbocharger compressors
Shaaban, S.
Seume, J.
[J]. PROCEEDINGS OF THE ASME TURBO EXPO, VOL 3, 2007, : 881 - 889
[5] The Efficiency of Turbocharger Compressors With Diabatic Flows
Casey, Michael V.
Fesich, Thomas M.
[J]. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2010, 132 (07):
[6] The development of effective casing treatment for turbocharger compressors
Yamaguchi, S
Yamaguchi, H
Goto, S
Nakao, H
Nakamura, F
[J]. TURBOCHARGERS AND TURBOCHARGING, 2002, 2002 (01): : 23 - 32
[7] COMPONENT MATCHING OF CENTRIFUGAL COMPRESSORS FOR TURBOCHARGER APPLICATION
Chen, Hua
[J]. PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 2C, 2017,
[8] COMPRESSOR HOUSING DESIGN FOR SMALL TURBOCHARGER COMPRESSORS
Chen, Hua
Li, Penny
[J]. PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 6C, 2013,
[9] Inlet recirculation in automotive turbocharger centrifugal compressors
Harley, P. X. L.
Spence, S. W. T.
Early, J.
Filsinger, D.
Dietrich, M.
[J]. 11TH INTERNATIONAL CONFERENCE ON TURBOCHARGERS AND TURBOCHARGING, 2014, : 89 - 100
[10] A new method for performance map prediction of automotive turbocharger compressors with both vaneless and vaned diffusers
Li, Xiaojian
Zhao, Yijia
Liu, Zhengxian
Yao, Huadong
Chen, Hua
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2021, 235 (06) : 1734 - 1747

← 1 2 3 4 5 →