Synchronous Electrostatic Machine Torque Modulation via Complex Vector Voltage Control With a Current Source Inverter

Advances in electrostatic machine design have enhanced the torque density of macroscale electrostatic machines toward practical use. A recently developed fractional horsepower three-phase separately excited synchronous electrostatic machine (SEM) demonstrates torque densities comparable to those of air-cooled permanent-magnet-based electromagnetic machines (1.5 Nm/kg) when excited with a medium voltage (5 kV). SEMs develop torque from voltage, not from current, and therefore incur nearly zero losses at low speeds or stall. However, there is no off-the-shelf medium-voltage drive at this power level, and the appropriate control framework for these machines has yet to be established. This article presents a complex vector voltage regulator control approach as a means for modulating torque in an SEM. Ampere-second (charge) is sourced from a current source inverter (CSI) serving as the drive electronics for voltage regulation. Together, the control approach and the CSI hardware form the first high-performance electrostatic drive. Key research outcomes include the theoretical development and experimental verification of charge-oriented control via voltage regulation. Experimental results are presented for rotational and stall conditions, which are reflective of the x201C;position and holdx201D; applications suited to electrostatic machines. The dynamic performance of the voltage regulator is verified by measuring the controller frequency response function, dynamic stiffness, and command tracking on a separately excited SEM.