Investigation of Elliptical Crack Geometry In a Thin Plate

被引：0

作者：

Goud, Nayani Uday Ranjan ^{[1
]}

Bandary, Abheendra ^{[1
]}

Harish, C. H. Venkata ^{[1
]}

Meghanath, G. ^{[1
]}

机构：

[1] MLR Inst Technol, Dept Aeronaut Engn, Hyderabad, India

来源：

3RD INTERNATIONAL CONFERENCE ON ADVANCEMENTS IN AEROMECHANICAL MATERIALS FOR MANUFACTURING: ICAAMM-2020 | 2021年 / 2317卷

关键词：

crack growth; crack geometry; stress concentration factor; STRESS-CONCENTRATION;

D O I：

10.1063/5.0036433

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

Prediction of crack growth is the heart of damage tolerance of any mechanical design. The present investigation shows the variation in stress concentration factor for various geometries of the crack in a thin plate. The analysis will be carried out by varying the ddimensions of the crack of various geometrical shapes. Aluminum six series sheet metal is considered with holes in which minor axis is varied for the analysis. These geometries are fine meshed and load is applied at one end keeping remaining ends fixed. The stress concentration factor for the varying geometries will be analyzed and compared the results with the numeric analysis for validation.

引用

页数：8

共 50 条

[1] TENSION OF A PLATE CONTAINING AN EMBEDDED ELLIPTICAL CRACK
ISIDA, M
NOGUCHI, H
[J]. ENGINEERING FRACTURE MECHANICS, 1984, 20 (03) : 387 - 408
[2] Simulating isochromatics in the vicinity of crack tip using an infinite plate with a thin single elliptical hole
Soares, WA
Martins, GDP
deAndrade, AHP
Godefroid, LB
[J]. INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS: ADVANCES AND APPLICATIONS, 1997, 2921 : 356 - 361
[3] SINGULAR SOLUTIONS OF ANISOTROPIC PLATE WITH AN ELLIPTICAL HOLE OR A CRACK
Lu Pin Chen Haibo (CAD Key Laboratory of Mechanical Behavior and Design of Materials
[J]. Acta Mechanica Solida Sinica, 2005, (02) : 130 - 141
[4] Singular solutions of anisotropic plate with an elliptical hole or a crack
Lu, P
Chen, HB
[J]. ACTA MECHANICA SOLIDA SINICA, 2005, 18 (02) : 130 - 141
[5] New stress intensity factor solutions for an elliptical crack in a plate
Le Delliou, P.
Barthelet, B.
[J]. NUCLEAR ENGINEERING AND DESIGN, 2007, 237 (12-13) : 1395 - 1405
[6] CRACK INITIATION FROM INCLINED THIN ELLIPTICAL HOLES
SCHRODER, K
PACKMAN, P
WEISS, V
[J]. ACTA METALLURGICA, 1964, 12 (12): : 1455 - &
[7] Heat conduction and thermal stress induced by an electric current in an infinite thin plate containing an elliptical hole with an edge crack
Hasebe, Norio
Bucher, Christian
Heuer, Rudolf
[J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2010, 47 (01) : 138 - 147
[8] Fatigue crack growth analysis of a plate with semi-elliptical surface crack subjected to tension
Ligoria, SA
Knight, GMS
Murthy, DSR
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2005, 58 (2-3) : 467 - 474
[9] Stress intensity factors for an embedded elliptical crack in a plate of finite thickness
Lee, DS
[J]. ACTA MECHANICA, 1997, 120 (1-4) : 127 - 140
[10] Stress intensity factors for an embedded elliptical crack in a plate of finite thickness
D. S. Lee
[J]. Acta Mechanica, 1997, 120 : 127 - 140

← 1 2 3 4 5 →