Fatigue behaviors of the Cu47.5Zr47.5Al5 bulk-metallic glass (BMG) and Cu47.5Zr38Hf9.5Al5BMG composite

被引：31
|
作者：
Qiao, D. C. [1 ]
Fan, G. J. [1 ]
Liaw, P. K. [1 ]
Choo, H. [1 ]
机构：
[1] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2007年 / 29卷 / 12期
基金：
美国国家科学基金会;
关键词：
bulk-metallic glass; composite; crystalline phase; compression; fatigue; crack-initiation; crack-propagation; fracture mechanism;
D O I：
10.1016/j.ijfatigue.2007.01.009
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Based on the Cu47.5Zr47.5Al5 bulk-metallic glass (BMG), the Cu47.5Zr38Hf9.5Al5 BMG composite with a CuZr phase is fabricated successfully. The four-point-bend fatigue behaviors are investigated. The fatigue-endurance limit of the BMG composite is 378 MPa, based on the stress range (sigma(r) = sigma(max) - sigma(min), where sigma(max) and sigma(min) are the applied maximum and minimum stresses, respectively). This value is much higher than that (224 MPa) of the BMG. The fatigue ratios (= the maximum stress range/yield strength corresponding to the fatigue cycles equal to 10(7)) of the BMG composite and the BMG are 0.23 and 0.12, respectively. The different fatigue-fracture surfaces of the BMG and BMG composite show somewhat different fracture mechanisms, which could be rationalized in terms of the effects of the second phase in the composite. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2149 / 2154
页数：6
相关论文
共 50 条
  • [1] Propagation of shear bands in a Cu47.5Zr47.5Al5 bulk metallic glass
    Kim, K. B.
    Das, J.
    Lee, M. H.
    Yi, S.
    Fleury, E.
    Zhang, Z. F.
    Wang, W. H.
    Eckert, J.
    [J]. JOURNAL OF MATERIALS RESEARCH, 2008, 23 (01) : 6 - 12
  • [2] Martensite formation in a ductile Cu47.5Zr47.5Al5 bulk metallic glass composite
    Pauly, Simon
    Das, Jayanta
    Duhamel, Cecile
    Eckert, Juergen
    [J]. ADVANCED ENGINEERING MATERIALS, 2007, 9 (06) : 487 - 491
  • [3] Propagation of shear bands in a Cu47.5Zr47.5Al5 bulk metallic glass
    K.B. Kim
    J. Das
    M.H. Lee
    S. Yi
    E. Fleury
    Z.F. Zhang
    W.H. Wang
    J. Eckert
    [J]. Journal of Materials Research, 2008, 23 : 6 - 12
  • [4] Effects of shot peening on the nanoindentation response of Cu47.5Zr47.5Al5 metallic glass
    Fornell, J.
    Concustell, A.
    Greer, A. L.
    Surinach, S.
    Baro, M. D.
    Sort, J.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 : S36 - S40
  • [5] Microstructure and microhardness evolutions of Cu47.5Zr47.5Al5 bulk metallic glass processed by rolling
    Cao, Q. P.
    Li, J. F.
    Zhou, Y. H.
    Jiang, J. Z.
    [J]. SCRIPTA MATERIALIA, 2008, 59 (06) : 673 - 676
  • [6] Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites
    Pauly, S.
    Liu, G.
    Wang, G.
    Kuehn, U.
    Mattern, N.
    Eckert, J.
    [J]. ACTA MATERIALIA, 2009, 57 (18) : 5445 - 5453
  • [7] Heterogeneity of a Cu47.5Zr47.5Al5 bulk metallic glass -: art. no. 051911
    Kim, KB
    Das, J
    Baier, F
    Tang, MB
    Wang, WH
    Eckert, J
    [J]. APPLIED PHYSICS LETTERS, 2006, 88 (05) : 1 - 3
  • [8] Prediction of fracture loci for CU47.5Zr47.5Al5
    Cao, Jun
    Li, Fuguo
    Ma, Xinkai
    Sun, Zhankun
    [J]. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, 96 : 795 - 802
  • [9] Thermomechanical characterization of Cu47.5Zr47.5Al5 bulk metallic glass within the homogeneous flow regime
    Lee, Kwang Seok
    Jun, Hyun-Joon
    Pauly, Simon
    Bartusch, Birgit
    Chang, Young Won
    Eckert, Juergen
    [J]. INTERMETALLICS, 2009, 17 (1-2) : 65 - 71
  • [10] Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass
    Song, K. K.
    Pauly, S.
    Zhang, Y.
    Scudino, S.
    Gargarella, P.
    Surreddi, K. B.
    Kuehn, U.
    Eckert, J.
    [J]. INTERMETALLICS, 2011, 19 (10) : 1394 - 1398
12345