Nano-level finishing of single crystal silicon blank using magnetorheological finishing process

被引：71
|
作者：
Sidpara, Ajay [1 ]
Jain, V. K. [1 ]
机构：
[1] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India
来源：
TRIBOLOGY INTERNATIONAL | 2012年 / 47卷
关键词：
Abrasive; Polishing; Roughness; Material removal; REMOVAL; GLASS; SURFACES;
D O I：
10.1016/j.triboint.2011.10.008
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Magnetorheological finishing (MRF) utilizes magnetorheological (MR) fluid, which consists of magnetic particles, nonmagnetic abrasives, and some additives in water or other carrier to polish the materials. An experimental study is conducted to predict the effect of process parameters (concentration of magnetic particles and abrasive particles, carrier wheel speed, and initial surface roughness) on surface finish and material removal rate in MRF of single crystal silicon blank. The final surface roughness value in terms of arithmetical mean roughness (Ra) obtained is as low as 8 nm from the initial value of 1300 nm. An optimization study is also carried out to find optimum values of process parameters from the selected range. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：159 / 166
页数：8
相关论文
共 50 条
  • [1] Research on magnetorheological finishing of aspheric optics for single-crystal silicon
    Zhang, Yunfei
    Fang, Fengzhou
    Fan, Wei
    Huang, Wen
    Wang, Chao
    Ma, Shasha
    He, Jianhong
    SECOND SYMPOSIUM ON NOVEL TECHNOLOGY OF X-RAY IMAGING, 2019, 11068
  • [2] Parametric study on influence function in magnetorheological finishing of single crystal silicon
    Gourhari Ghosh
    Raj K. Dalabehera
    Ajay Sidpara
    The International Journal of Advanced Manufacturing Technology, 2019, 100 : 1043 - 1054
  • [3] Parametric study on influence function in magnetorheological finishing of single crystal silicon
    Ghosh, Gourhari
    Dalabehera, Raj K.
    Sidpara, Ajay
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (5-8): : 1043 - 1054
  • [4] Experimental investigation and machine parameter optimization for nano finishing of fused silica using magnetorheological finishing process
    Gupta, Mahender Kumar
    Dinakar, D.
    Chhabra, Inder Mohan
    Jha, Sunil
    Madireddy, Buchi Suresh
    OPTIK, 2021, 226
  • [5] Nano-finishing of the monocrystalline silicon wafer using magnetic abrasive finishing process
    Mosavat, Mohammad
    Rahimi, Abdolreza
    Eshraghi, Mohammad Javad
    Karami, Saeideh
    APPLIED OPTICS, 2019, 58 (13) : 3447 - 3453
  • [6] A combination process of Magnetorheological finishing and Computer controlled optical surfacing on Single-crystal silicon surface
    Luo, Chi
    Shi, Feng
    YeTian
    Zhong, Yaoyu
    9TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES, 2019, 10838
  • [7] PARAMETRIC OPTIMIZATION FOR NANO-FINISHING OF THE EXTERNAL CYLINDRICAL SURFACES USING ROTATING CORE MAGNETORHEOLOGICAL FINISHING PROCESS
    Singh, Manpreet
    Singh, Anant Kumar
    PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4, 2018,
  • [8] NANO-FINISHING OF STAINLESS-STEEL TUBES USING ROTATIONAL MAGNETORHEOLOGICAL ABRASIVE FLOW FINISHING PROCESS
    Das, Manas
    Jain, V. K.
    Ghoshdastidar, P. S.
    MACHINING SCIENCE AND TECHNOLOGY, 2010, 14 (03) : 365 - 389
  • [9] Nano-precision Finishing Technology Based on Magnetorheological Finishing
    Li, Yaoming
    Shen, Xingquan
    Wang, Ailing
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XV, 2009, 416 : 118 - 122
  • [10] Fine-finishing of stepped cylindrical workpiece using magnetorheological finishing process
    Rana, Ajay Singh
    Bedi, Talwinder Singh
    Grover, Vishwas
    MATERIALS TODAY-PROCEEDINGS, 2021, 41 : 886 - 892
12345