Effect of Multi-Walled Nanotubes on the Interlaminar Shear Strength of Glass Fiber/Acrylate Composite Fabricated by Stepwise Ultra-Violet Light Curing

被引：5

作者：

Zhang, Jingjing ^{[1
]}

Duan, Yugang ^{[1
]}

Zhang, Xiaohui ^{[1
]}

Chen, Jie ^{[1
]}

机构：

[1] Xi An Jiao Tong Univ, State Key Lab Mfg Syst Engn, Sch Mech Engn, Xian 710049, Shaanxi, Peoples R China

来源：

POLYMER COMPOSITES | 2017年 / 38卷 / 10期

基金：

美国国家科学基金会;

关键词：

CARBON NANOTUBES; GLASS/EPOXY COMPOSITES; EPOXY COMPOSITES; MATRIX; REINFORCEMENT;

D O I：

10.1002/pc.23786

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

The interlaminar shear strength (ILSS) of glass fiber/acrylate composite with stepwise ultraviolet (UV) light curing was enhanced by adding multi-walled carbon nanotubes (MWCNTs) into the resin matrix. The maximum content of MWCNTs that can be used in the process was investigated. Differential scanning calorimetry (DSC) results indicated that prepreg with MWCNTs of more than 0.5% by weight was difficult to cure by UV light because of its poor UV light penetration ability. The ILSS was improved obviously due to the improved resin toughness, crack propagation resistance and interfacial adhesion between the resin and glass fibers according to SEM images. Experimental results suggested that the addition of MWCNTs is an effective method to improve the ILSS of UV stepwise curing composites. (C) 2015 Society of Plastics Engineers

引用

页码：2113 / 2118

页数：6

共 22 条

[1] Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes
Fan, Zhihang
Santare, Michael H.
Advani, Suresh G.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (03) : 540 - 554
[2] UV stepwise cured fabrication of glass fiber/acrylate composites: Effects of exposure dose on curing uniformity and interlaminar shear strength
Zhang, Xiaohui
Duan, Yugang
Zhao, Xinming
Li, Dichen
JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (10) : 1395 - 1401
[3] Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites
Chandrasekaran, V. C. S.
Advani, S. G.
Santare, M. H.
CARBON, 2010, 48 (13) : 3692 - 3699
[4] Effect of Multi-walled Carbon Nanotube and Vacuum on the Fracture Toughness of Glass Fiber Composite Materials
Gou, Tian
Yum, Young Jin
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2020, 44 (02) : 93 - 99
[5] Development of hybrid composite by integrating functionalized multi-walled carbon nanotubes (f-MWCNTs) with glass fiber reinforced polyester composite
Gul, Shaban
Abdullah, Muhammad
Zafar, Mahnoor
Ali, Irshad
Khan, Nehar Ullah
Younas, Mohammad
Rezakazemi, Mashallah
PLOS ONE, 2022, 17 (12):
[6] The effect of ultraviolet (UV) light postcuring on resin hardness and interlaminar shear strength of a glass-fibre/vinylester composite
P. Compston
D. Dexter
Journal of Materials Science, 2008, 43 : 5017 - 5019
[7] The effect of ultraviolet (UV) light postcuring on resin hardness and interlaminar shear strength of a glass-fibre/vinylester composite
Compston, P.
Dexter, D.
JOURNAL OF MATERIALS SCIENCE, 2008, 43 (14) : 5017 - 5019
[8] Dynamic Bending Characterization of Delaminated Epoxy/Glass Fiber Based Hybrid Composite Plate Reinforced with Multi-walled Carbon Nanotubes
Mesfin Kebede Kassa
Addamu Getachew
Lavish Kumar Singh
Paul Praveen Albert
Ananda Babu Arumugam
Journal of Vibration Engineering & Technologies, 2023, 11 : 19 - 41
[9] Dynamic Bending Characterization of Delaminated Epoxy/Glass Fiber Based Hybrid Composite Plate Reinforced with Multi-walled Carbon Nanotubes
Kassa, Mesfin Kebede
Getachew, Addamu
Singh, Lavish Kumar
Albert, Paul Praveen
Arumugam, Ananda Babu
JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, 2023, 11 (01) : 19 - 41
[10] EFFECT OF MULTI-WALLED CARBON NANOTUBES ON SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN DRILLING EPDXY/GLASS FABRIC COMPOSITE
Ponnuvel, S.
Moorthy, T. V.
Hariharan, P.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2016, 22 (02): : 1363 - 1375

← 1 2 3 →