Study on preparation and property of phenolic-SiO2 core-shell composite hollow microspheres

被引:0
|
作者
Fan, Junmei [1 ]
Yuan, Fanli [1 ]
Zhao, Peichen [1 ]
Zhang, Chunxia
机构
[1] Chinese Acad Sci, Inst Proc Engn, State Key Lab Multiphase Complex Syst, Beijing 100190, Peoples R China
关键词
phenolic resin; SiO2; composite hollow microsphere; preparation; wear-resisting property;
D O I
10.1016/j.proeng.2015.01.181
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The great advantage of hollow SiO2 microspheres is low density and high-temperature resistance, however, the toughness and wear-resisting property is poor, so it can't be used in the condition of mechanical friction and high-speed shearing. Therefore, phenolic-SiO2 core-shell composite hollow microspheres were prepared by spray coating process, and the properties were measured. The results indicate that the core-shell composite hollow microspheres not only have low density and high-temperature resistance, but also have good toughness and wear-resisting property. The compressive strength was 50 MPa. The density was 0.54-0.65 g/cm(3). Temperature resistance was 120 degrees C. Grain diameter was 2 similar to 00 mu m and the percentage of damage on the condition of grinding for 16h was very low. Phenolic-SiO2 core-shell composite hollow microspheres have good prospect in the field of the development of oil gas and spaceflight. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:435 / 442
页数:8
相关论文
共 50 条
  • [1] Preparation of core-shell polystyrene/silica composite microspheres and hollow silica spheres
    Yang, XL
    Zhu, YH
    Zhu, MQ
    Li, CZ
    JOURNAL OF INORGANIC MATERIALS, 2003, 18 (06) : 1293 - 1298
  • [2] Preparation and property study of ZnOw/PANi core-shell composite
    Key Laboratory of Advanced Technologies of Materials, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
    Gongneng Cailiao, 2008, 10 (1720-1723):
  • [3] Preparation of core-shell SiO2/ZnS and hollow nanospheres
    Xu Yang-Zi
    Hu He
    JOURNAL OF INORGANIC MATERIALS, 2007, 22 (05) : 847 - 852
  • [4] Preparation and Characterization of SiO2/SiCN Core-shell Ceramic Microspheres
    Zhang H.-Y.
    Liu H.-L.
    Li J.
    Kang W.
    Liu, Hong-Li (liuhonglitianjin@163.com), 1600, Beijing Institute of Aeronautical Materials (BIAM) (45): : 7 - 12
  • [5] Pickering emulsion polymerization: Preparation of polystyrene/nano-SiO2 composite microspheres with core-shell structure
    Zhang, K.
    Wu, W.
    Meng, H.
    Guo, K.
    Chen, J. -F.
    POWDER TECHNOLOGY, 2009, 190 (03) : 393 - 400
  • [6] Preparation and Characterization of Core-Shell PS/Ni Composite Microspheres
    Zhao, Wen
    Zhang, Qiuyu
    Zhang, Junping
    Gu, Junwei
    Guo, Feige
    POLYMER COMPOSITES, 2009, 30 (08) : 1098 - 1105
  • [7] PREPARATION AND CHARACTERIZATION OF MAGNETIC COMPOSITE MICROSPHERES WITH CORE-SHELL STRUCTURE
    Gong Tao
    Wang Changchun
    ACTA POLYMERICA SINICA, 2008, (11) : 1037 - 1042
  • [8] Preparation of thermoresponsive core-shell polymeric microspheres and hollow PNIPAM microgels
    Zhang, Feng
    Wang, Chang-Chun
    COLLOID AND POLYMER SCIENCE, 2008, 286 (8-9) : 889 - 895
  • [9] Preparation of polystyrene/zirconia core-shell microspheres and zirconia hollow shells
    Yin, JL
    Qian, XF
    Yin, H
    Shi, MW
    Zhang, HC
    Zhou, GT
    INORGANIC CHEMISTRY COMMUNICATIONS, 2003, 6 (07) : 942 - 945
  • [10] Fabrication and study of superficially porous core-shell SiO2@SiO2 microspheres
    Zhang, Hui
    Tang, Qi
    Gao, Lilong
    Yuan, Hua
    Cong, Hai-Lin
    Yu, Bing
    FERROELECTRICS, 2018, 530 (01) : 45 - 50