Wear Resistance of the Surface Layers in Silumin after Electron-Beam Treatment

被引：1

作者：

Zagulyaev, D., V ^{[1
]}

Gromov, V. E. ^{[1
]}

Konovalov, S., V ^{[2
]}

Glezer, A. M. ^{[3
]}

Panin, S., V ^{[4
]}

Ivanov, Yu F. ^{[5
]}

机构：

[1] Siberian State Ind Univ, Novokuznetsk 654007, Russia

[2] Korolev Samara Natl Res Univ, Samara 443086, Russia

[3] Natl Univ Sci & Technol MISiS, Moscow 119049, Russia

[4] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk 634021, Russia

[5] Russian Acad Sci, Inst High Current Elect, Siberian Branch, Tomsk 634055, Russia

来源：

RUSSIAN METALLURGY | 2019年 / 2019卷 / 10期

关键词：

silumin; electron-beam treatment; structure; surface layers; friction; wear resistance; hardness;

D O I：

10.1134/S0036029519100318

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The hardness and the tribological properties of the AK10M2N silumin subjected to irradiation by a high-energy pulsed electron beam with an energy density of 35 J/cm(2) are studied. As compared to the as-cast state, the microhardness of the surface layers increases by approximate to 20% (up to approximate to 1.2 GPa), the friction coefficient decreases by a factor of approximate to 1.3 (down to 0.42), and the wear parameter decreases by a factor of approximate to 6.6 (down to 0.74 x 10(-3) mm(3)/(N m)). These changes are shown to be caused by the dissociation of silicon and intermetallic compounds in the surface layer during irradiation by a high-energy pulsed electron beam.

引用

页码：981 / 985

页数：5

共 50 条

[1] Wear Resistance of the Surface Layers in Silumin after Electron-Beam Treatment
D. V. Zagulyaev
V. E. Gromov
S. V. Konovalov
A. M. Glezer
S. V. Panin
Yu. F. Ivanov
Russian Metallurgy (Metally), 2019, 2019 : 981 - 985
[2] Increase in Wear Resistance of the Surface Layers of AK10M2N Silumin at Electron-Beam Treatment
Zagulyaev D.V.
Gromov V.E.
Konovalov S.V.
Ivanov Y.F.
Inorganic Materials: Applied Research, 2019, 10 (03) : 622 - 628
[3] Structural-Phase State and the Properties of Silumin after Electron-Beam Surface Treatment
Yu. F. Ivanov
V. E. Gromov
S. V. Konovalov
D. V. Zagulyaev
E. A. Petrikova
Russian Metallurgy (Metally), 2019, 2019 : 398 - 402
[4] Structural-Phase State and the Properties of Silumin after Electron-Beam Surface Treatment
Ivanov, Yu. F.
Gromov, V. E.
Konovalov, S. V.
Zagulyaev, D. V.
Petrikova, E. A.
RUSSIAN METALLURGY, 2019, 2019 (04): : 398 - 402
[5] Electron-beam application for wear-resistance steel surface layers formation
Teplyikh, A. M.
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2011, (03): : 91 - 94
[6] Fatigue variation of surface properties of silumin subjected to electron-beam treatment
Konovalov, S. V.
Aksenova, K. V.
Gromov, V. E.
Ivanov, Yu F.
Semina, O. A.
INTERNATIONAL SCIENTIFIC CONFERENCE ON RADIATION-THERMAL EFFECTS AND PROCESSES IN INORGANIC MATERIALS 2015 (RTEP2015), 2016, 110
[7] Properties of surface layers of manganese steels after electron-beam treatment
Malinov, LS
Kharlanova, EY
Zarechenskii, AV
Nechai, AA
Minenko, IV
METAL SCIENCE AND HEAT TREATMENT, 1995, 37 (11-12) : 485 - 488
[8] Fractography of Fatigue Fracture Surface in Silumin Subjected to Electron-Beam Processing
Konovalov, S. V.
Aksenova, K. V.
Gromov, V. E.
Ivanov, Yu F.
Semina, O. A.
VII INTERNATIONAL SCIENTIFIC PRACTICAL CONFERENCE INNOVATIVE TECHNOLOGIES IN ENGINEERING, 2016, 142
[9] An increase in fatigue service life of eutectic silumin by electron-beam treatment
Yu. F. Ivanov
K. V. Aksenova
V. E. Gromov
S. V. Konovalov
E. A. Petrikova
Russian Journal of Non-Ferrous Metals, 2016, 57 : 236 - 242
[10] TREATMENT OF SILUMIN SURFACE BY A MODULATED SUBMILLISECOND ELECTRON BEAM
Vorobyov, M. S.
Ashurova, K. T.
Ivanov, Yu F.
Moskvin, P., V
Petrikova, E. A.
Petyukevich, M. S.
Rygina, M. E.
Shin, V., I
Doroshkevich, S. Yu
HIGH TEMPERATURE MATERIAL PROCESSES, 2022, 26 (04): : 1 - 10

← 1 2 3 4 5 →