A Low-power Frontend System for Fetal ECG Monitoring Applications

This paper presents a three-channel frontend system for fetal monitoring applications which includes three amplification chains, an ADC and all power management circuitry needed to feed the different building blocks from a single 1.4V supply. The specifications of the proposed system (0.38 mu V-rms equivalent input noise, 74.5dB dynamic range and 0.5 to 200Hz signal bandwidth) are determined according to the properties of the fetal electrocardiogram (fECG) signal and realistic user scenarios. A low-power noise-reconfigurable preamplifier topology exploiting power optimization in both voltage and current domain is used, to achieve a Power Efficiency Factor (PEF) of 2.2 for the whole amplification chain. The 12bit SAR ADC is optimized for high resolution and power efficiency. The frontend system is designed in a 0.18 mu m CMOS process. Simulation results show that that each of the three amplification channels provides a total gain of 60dB a bandwidth of 200Hz, with an input equivalent noise of 0.38 mu V-rms. The ADC provides 11.7bit ENOB and a FoM of 14fJ/step, while its sample speed can vary from 500Hz to 10kHz. The whole system consumes a power of 7.8 mu W when configured for the fECG application.