Modelling of the effect of discontinuities on the extent of the fracture zone surrounding deep tunnels (Reprinted from Tunnels under Pressure)

A series of physical and numerical model tests were performed to investigate the behaviour of the rock surrounding circular excavations under high confining pressures. The aim was to provide information on the formation of fractures around deep level mine tunnels under controlled conditions. Solid cubes containing a circular hole were confined to a vertical pressure of 200 MPa with a confinement of 100 MPa in the two horizontal directions. To provide a contrast, a block was made from a series of plates to simulate the presence of horizontal bedding planes. The resulting fracture patterns are completely different and emphasized that the amount of fracturing would be considerably increased as a result of discontinuities in the rock. Analysis of acoustic emission data provides insights into the response of the rock during loading and unloading and assists with the identification of the effect of the discontinuities. A model based on Mohr Coulomb plasticity and rotating smeared-crack concepts has been developed to represent the formation of discrete fracture processes in a continuum under compressive and tensile stress conditions. The model is implemented in a discrete element - finite element method and is able to represent the change in fracture patterns between the solid and jointed blocks. This provides confidence for the application of the numerical model to the design of mine tunnels at great depth. (C) 2001 South African Institute of Mining and Metallurgy. Published by Elsevier Science Ltd. All rights reserved.