Modeling the slope of embankment dam during static and dynamic stability analysis: a case study of Koga dam, Ethiopia

Quantitative assessment of the stability of slopes is very important for the evaluation of an earth fill dam in order to perform the intended function throughout the service life. This study presents the slope stability and analysis of the Koga earth fill dam. The analyses were carried out using finite element-based PLAXIS 2D software. The behavior of both the body and the foundation of the dam was described using the Mohr-Coulomb criterion. Based on the result of this study, the resulting factor of safety values during end of construction for both static and dynamic stability analysis was 1.6221 and 1.3592, respectively. For steady-state condition, the water level was fixed at normal pool level (2015.25 m). The factor of safety obtained for static stability analysis was 1.6136 and the dynamic analysis 1.3157. The rapid drawdown condition is analyzed with normal pool level of 2015.25 m lowered to 2008.5 m. The analysis results showed that the factor of safety for the static and dynamic analysis was 1.2199 and 1.0353, respectively. Using recommended design standards: United States Army Corps of Engineers, British Dam Society and the Canadian Dam Association the slope stability analysis of the Koga earth dam at all critical loading conditions are safe. The displacement result shows the maximum total displacements for static and dynamic analysis were 1.033% and 1.628% of the dam height, respectively. The displacement result coincides with Fell et al. (J Geotech Geoenviron Eng 129(4):307-314, 2003) standards.