Geo-Electrical Detection of Impermeable Membranes in the Subsurface

Featured Application Looking ahead capabilities of electrical resistivity tomography (ERT) for a soil penetrating tool. In this paper, we have investigate looking ahead capabilities of electrical resistivity tomography (ERT) for a soil penetrating tool with electrodes. In our case study, the desired detection resolution (10 to 20 cm at a depth of at least 6 m) was much higher than what can be achieved from classical surface ERT measurements. Therefore, we designed a logging-type tool, that can be pushed into the ground. Our target was a buried PVC membrane which acts as an electrical insulator. In this phase, we performed numerical simulations and laboratory measurements. The methodology is based on a two-step approach. First, we calculate the background resistivity of the tool's path is determined by inversion of near-looking electrode configurations. Next, the theoretical response (kernel) of the far-looking configurations is calculated for different membrane positions. The root mean square (RMS) error between the kernel and the measurements is minimized to detect the membrane. If the membrane is within sensing reach, the RMS has a minimum for the kernel corresponding to the true membrane position. If no minimum in RMS is found, the membrane is not within sensing reach and the tool can be pushed closer to the membrane. The laboratory tests comprised measurements in a tank filled with either water or saturated sand or saturated sand with clay slabs and chunks. The laboratory results were successful in pinpointing the position of the membrane with an accuracy of 10 to 20 cm, depending on the dimension of the tool and the distance from the membrane.