Fatigue crack propagation in a structural steel after flash welding

被引：0

作者：

Carneiro, Marcos Alex ^{[1
]}

Soares Pereira, Marcos Venicius ^{[2
]}

Darwish, Fathi Aref ^{[3
]}

Motta, Sergio Henrique ^{[4
]}

机构：

[1] Petrobras SA, Refinaria Capuava, Sao Paulo, Brazil

[2] Pontificia Univ Catolica Rio de Janeiro, Dept Ciencia Mat & Met, Rio De Janeiro, Brazil

[3] Univ Fed Fluminense, Program Posgrad Engn Civil, Niteroi, RJ, Brazil

[4] Brasil Amarras, Gerencia Tecnol, Niteroi, RJ, Brazil

来源：

SOLDAGEM & INSPECAO | 2008年 / 13卷 / 01期

关键词：

mooring systems; chain links; heat treatments; fatigue resistance;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A study has been made concerning the affect of tempered martensite volume fraction on the fatigue behavior of a quenched and tempered R4 grade structural steel, largely adopted for fabricating offshore mooring chains. As the chain links are fabricated by flash welding, the study also included welded joints. Martensite content was varied by using different austenitization temperatures and fatigue resistance of quenched and tempered specimens was determined by following crack growth during constant amplitude cyclic loading. The results indicated that an increase in the ferrite volume fraction was associated with an increase in the number of cycles to failure and that for a given microstructural condition, the fatigue life of the welded joint was invariably shorter than that of the base material. Finally, the fatigue behavior is presented and discussed considering the mechanical properties and the toughness of the fatigued specimens

引用

页码：2 / 10

页数：9

共 50 条

[1] Fatigue crack propagation in a structural steel after flash welding
Carneiro, Marcos Alex
Pereira, Marcos Venicius Soares
Darwish, Fathi Aref
Motta, Sérgio Henrique
[J]. 2008, Universidade Federal de Uberlandia (13):
[2] Modelling probabilistic fatigue crack propagation rates for a mild structural steel
Correia, J. A. F. O.
de Jesus, A. M. P.
Fernandez-Canteli, A.
Calcada, R. A. B.
[J]. FRATTURA ED INTEGRITA STRUTTURALE, 2015, (31): : 80 - 96
[3] Fatigue crack propagation in maraging steel
Hussain, K
Tauqir, A
ul Haq, A
Khan, AQ
[J]. MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (12) : 1063 - 1065
[4] FATIGUE CRACK PROPAGATION IN MILD STEEL
BELLOW, DG
LONG, BR
[J]. CANADIAN METALLURGICAL QUARTERLY, 1966, 5 (01) : 19 - &
[5] Welding residual stress and its effect on fatigue crack propagation after overloading
Yuan, K.
Sumi, Y.
[J]. ANALYSIS AND DESIGN OF MARINE STRUCTURES, MARSTRUCT 2013, 2013, : 447 - 455
[6] EFFECT OF RESIDUAL WELDING STRESSES ON PROPAGATION OF FATIGUE CRACKS IN A STRUCTURAL-STEEL
TRUFYAKOV, VI
MIKHEEV, PP
KUZMENKO, AZ
[J]. AUTOMATIC WELDING USSR, 1977, 30 (10): : 4 - 6
[7] An investigation of bending fatigue crack propagation in structural steel by the measurement of indirect parameters
Ana Maria Gontijo Figueiredo
Gabriel de Oliveira Ribeiro
José Felipe Dias
Paulo José Modenesi
Felipe Leonardo Pereira Queiroz
Juliana de Oliveira Vasconcelos
Humberto Alves da Silveira Monteiro
[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015, 37 : 305 - 312
[8] An investigation of bending fatigue crack propagation in structural steel by the measurement of indirect parameters
Gontijo Figueiredo, Ana Maria
Ribeiro, Gabriel de Oliveira
Dias, Jose Felipe
Modenesi, Paulo Jose
Pereira Queiroz, Felipe Leonardo
Vasconcelos, Juliana de Oliveira
da Silveira Monteiro, Humberto Alves
[J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2015, 37 (01) : 305 - 312
[9] THE EFFECT OF WELDING ON THE FATIGUE-CRACK GROWTH-RATE IN A STRUCTURAL-STEEL
RADING, GO
[J]. WELDING JOURNAL, 1993, 72 (07) : S307 - S312
[10] FATIGUE CRACK-PROPAGATION IN 4140 STEEL
THIELEN, PN
FINE, ME
[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1975, 6 (11): : 2133 - 2141

← 1 2 3 4 5 →