The microstructure of melt spun Ti-Ni-Cu-Zr shape memory alloys

被引:13
|
作者
Vermaut, P
Litynska, L
Portier, R
Ochin, P
Dutkiewicz, J
机构
[1] Ecole Normale Super, Lab Met Struct, F-75231 Paris 05, France
[2] CNRS, UPR 2801, Ctr Etud Chim Met, F-94400 Vitry Sur Seine, France
[3] Polish Acad Sci, Inst Met & Mat Sci, PL-30059 Krakow, Poland
关键词
Ti-Ni-Cu-Zr alloys; melt-spinning; shape memory alloys; amorphous structure; microstructure;
D O I
10.1016/S0254-0584(03)00026-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
NiTi base shape memory melt spun ribbons with a high substitution of Ni by Cu and Ti by Zr have been analysed. Depending of the chemical composition of the alloy, the ribbons are crystalline or amorphous. Transmission electron microscopy (TEM) studies in the as-cast state and after crystallization indicated that in the as-cast state the Ti40Ni25Cu25Zr10 ribbons are constituted of two phases (Ti2Ni + amorphous phase) whereas the Ti40Ni35Cu15Zr10 ribbons are fully amorphous and are single phase after crystallisation with a B2 structure. High resolution electron microscopy (HREM) observations have shown that the crystalline/amorphous phase interface is highly wavy even at the nanometric scale and that the B2 particles are single ordered domains. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:380 / 382
页数:3
相关论文
共 50 条
  • [1] Characterisation of melt spun Ni-Ti shape memory Ribbons' microstructure
    Mehrabi, Kambiz
    Bruncko, Mihael
    Kneissl, Albert C.
    Colic, Miodrag
    Stamenkovic, Dragoslav
    Fercec, Janko
    Anzel, Ivan
    Rudolf, Rebeka
    [J]. METALS AND MATERIALS INTERNATIONAL, 2012, 18 (03) : 413 - 417
  • [2] Characterisation of melt spun Ni-Ti shape memory Ribbons’ microstructure
    Kambiz Mehrabi
    Mihael Brunčko
    Albert C. Kneissl
    Miodrag Čolič
    Dragoslav Stamenković
    Janko Ferčec
    Ivan Anžel
    Rebeka Rudolf
    [J]. Metals and Materials International, 2012, 18 : 413 - 417
  • [3] Microstructure and crystallization of melt-spun Ti-Ni-Zr-Y alloys
    Wang, LM
    Li, CF
    Ma, LQ
    Inoue, A
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2002, 339 (1-2) : 216 - 220
  • [4] Texture and microstructure of Ti-Ni-melt-spun shape memory alloy ribbons
    Khantachawana, A
    Mizubayashi, H
    Miyazaki, S
    [J]. MATERIALS TRANSACTIONS, 2004, 45 (02) : 214 - 218
  • [5] IMPROVEMENT OF DUCTILITY OF MELT SPUN CU-AL-NI SHAPE MEMORY ALLOY RIBBONS BY ADDITION OF TI OR ZR
    MATSUOKA, S
    HASEBE, M
    OSHIMA, R
    FUJITA, FE
    [J]. JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1983, 22 (08): : L528 - L530
  • [6] Glass forming ability and microstructure of Zr-Ti-Ni-Cu-Al and Zr-Ti-Ni-Cu-Ag melt spun ribbons
    Czeppe, T
    Rashkova, V
    Dobrev, E
    Lityñskaa, L
    Morgiel, J
    Labar, JL
    Dutkiewicz, J
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 : 260 - 264
  • [7] Icosahedral and amorphous phases in melt-spun Ti-Zr-Ni-Cu alloys
    Wang, LM
    Inoue, A
    [J]. MATERIALS TRANSACTIONS, 2001, 42 (12) : 2637 - 2640
  • [8] Crystallographic and electrochemical characteristics of melt-spun Ti-Zr-Ni-Cu alloys
    Liu Baozhong
    Wu Yaoming
    Wang Limin
    [J]. RARE METALS, 2007, 26 (05) : 440 - 444
  • [9] Crystallographic and electrochemical characteristics of melt-spun Ti-Zr-Ni-Cu alloys
    LIU Baozhong1
    [J]. Rare Metals, 2007, (05) : 440 - 444
  • [10] Microstructure and martensite transformation in aged Ti-25Ni-25Cu shape memory melt spun ribbons
    Morgiel, J
    Cesari, E
    Pons, J
    Pasko, A
    Dutkiewicz, J
    [J]. JOURNAL OF MATERIALS SCIENCE, 2002, 37 (24) : 5319 - 5325