Obtaining of W/Cu nanocomposite powders by high energy ball milling process

被引：2
|
作者：
Nicolicescu, Claudiu [1 ]
Nicoara, Victor Horia [1 ]
Popa, Florin [2 ]
Marinca, Traian Florin [2 ]
机构：
[1] Univ Craiova, Fac Mech, Dept Engn & Management Technol Syst, Drobeta Turnu Severin, Romania
[2] Tech Univ Cluj Napoca, Dept Mat Sci & Engn, Fac Mat & Environm Engn, Cluj Napoca, Romania
来源：
POWDER METALLURGY AND ADVANCED MATERIALS | 2018年 / 8卷
关键词：
Powder metallurgy; Tungsten nanopowders; W/Cu nanocomposite powders; Mechanical milling; W-CU COMPOSITE; MECHANICAL-PROPERTIES; FABRICATION; TUNGSTEN; MICROSTRUCTURE; DENSIFICATION; ALLOY;
D O I：
10.21741/9781945291999-20
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The morphology of the particles is important in the process of obtaining alloys based on W/Cu, thus this investigation is focused on the influence of the copper content on the properties of W/Cu nanocomposites powders obtained after 20 hours of high energy ball milling. The experimental results regarding the obtaining of W100-x/Cu-x nanocomposites (x between 20 and 45 wt. %) are presented. Composition of the mixtures influenced the particle size distribution namely, the higher is Cu content the larger dimensions of the particles will be attained. After 20 hours of high energy ball milling the crystallites size was about 30 nm for copper respectively 12 nm for tungsten and Cu atoms entered in the W structure.
引用
收藏
页码：173 / 181
页数：9
相关论文
共 50 条
  • [1] Synthesis of Cu-W nanocomposite by high-energy ball milling
    Venugopal, T.
    Rao, K. Prasad
    Murty, B. S.
    [J]. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2007, 7 (07) : 2376 - 2381
  • [2] Ni-SiO2 nanocomposite powders by high energy ball milling
    Corrias, A
    Paschina, G
    Sirigu, P
    Zedda, D
    [J]. SYNTHESIS AND PROPERTIES OF MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2 - ISMANAM-96, 1997, 235-2 : 199 - 204
  • [3] Reduction and sintering of WO3-CuO nanocomposite powders produced by high energy ball milling process
    Shim, WS
    Kim, DG
    Sekino, T
    Noh, JW
    Kim, YD
    Moon, IH
    [J]. JOURNAL OF CERAMIC PROCESSING RESEARCH, 2002, 3 (03): : 109 - 113
  • [4] Preparation of C/Cu Composite Powders by High-energy Ball Milling
    Guo, XiuYan
    Ma, GuoJin
    Xie, ShiKun
    Yi, RongXi
    [J]. FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 1049 - 1052
  • [5] Synthesis and characterisation of Si3N4p/Cu nanocomposite powders by high energy ball milling
    Lu, Z. J.
    Shen, Y. F.
    Gu, D. D.
    [J]. POWDER METALLURGY, 2010, 53 (01) : 86 - 90
  • [6] Metal injection molding of W-Cu powders prepared by low energy ball milling
    Kim, SW
    Suk, MJ
    Kim, YD
    [J]. METALS AND MATERIALS INTERNATIONAL, 2006, 12 (01) : 39 - 44
  • [7] Metal injection molding of W-Cu powders prepared by low energy ball milling
    Soon-Wook Kim
    Myung-Jin Suk
    Young-Do Kim
    [J]. Metals and Materials International, 2006, 12
  • [8] High-energy ball milling of Cu-5mass%C powders
    Jin, YP
    Guo, B
    Wang, ED
    [J]. PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY, 2004, : 639 - 643
  • [9] High energy planetary ball milling of SiC powders
    Shanghai Institute of Ceramics, Chinese Academy of Sciences, State Key Lab. of High Performance Ceramics and Superfine Microstructure, 1295Dingxi Road, Shanghai 200050, China
    不详
    [J]. Key Eng Mat, 2007, (7-14):
  • [10] High energy planetary ball milling of SiC powders
    Pan, Y. B.
    Huang, Z. R.
    Jiang, D. L.
    Mazerolles, L.
    Michel, D.
    Pastol, J. -L.
    Wang, G.
    [J]. COMPOSITE MATERIALS V, 2007, 351 : 7 - +
12345