A study of Taguchi and design of experiments method in injection molding process for polypropylene components

This study analyzes contour distortions, wear mass losses and tensile properties of polypropylene (PP) composite components applied to the interior coffer of automobiles. The specimens are prepared under different injection molding conditions by changing melting temperatures, injection speeds, and injection pressures via three computer-controlled progressive strokes. The contour distortions, wear and tensile properties are selected as quality targets. The arrangement of sixteen experiments is based on an orthogonal array table. Both the Taguchi method and the design of experiments (DOE) method are applied to determine an optimal parameter setting. In addition, a side-by-side comparison of two different approaches is provided. In this study, regression models that link the controlled parameters and the targeted outputs are developed, and the mathematic models can be utilized to predict the contour distortions, wear and tensile properties at various injection molding conditions.