Effects of Iron-Rich Intermetallics on Tensile Deformation of Al-Cu 206 Cast Alloys

被引：13
|
作者：
Liu, K. [1 ]
Cao, X. [1 ,2 ]
Chen, X-G. [1 ]
机构：
[1] Univ Quebec Chicoutimi, Dept Appl Sci, Chicoutimi, PQ G7H 2B1, Canada
[2] Natl Res Council Canada, Aerosp Mfg Technol Ctr, Inst Aerosp Res, Montreal, PQ H3T 2B2, Canada
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | 2015年 / 46卷 / 04期
基金：
加拿大自然科学与工程研究理事会;
关键词：
MECHANICAL-PROPERTIES; PHASES; MICROSTRUCTURE;
D O I：
10.1007/s11663-015-0294-1
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An investigation has been carried out of the influence of iron on the tensile properties and fracture behavior of a series of Al-Cu 206 cast alloys. Iron contents are explored from 0.15 to 0.5 wt pct, and at two levels of silicon and manganese. The types, morphologies and quantities of the various iron-rich intermetallics are characterized metallographically, and their effects on the tensile properties and the nucleation and growth of cracks during tensile deformation are studied. In addition, oxide films are shown to play an important role in both the nucleation of the iron-rich intermetallics and the formation of tensile cracks. (C) The Minerals, Metals & Materials Society and ASM International 2015
引用
收藏
页码：1566 / 1575
页数：10
相关论文
共 50 条
  • [1] Effects of Iron-Rich Intermetallics on Tensile Deformation of Al-Cu 206 Cast Alloys
    K. Liu
    X. Cao
    X. -G. Chen
    Metallurgical and Materials Transactions B, 2015, 46 : 1566 - 1575
  • [2] Effects of Iron-Rich Intermetallics and Grain Structure on Semisolid Tensile Properties of Al-Cu 206 Cast Alloys near Solidus Temperature
    Bolouri, Amir
    Liu, Kun
    Chen, X-Grant
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (12): : 6466 - 6480
  • [3] Effects of Iron-Rich Intermetallics and Grain Structure on Semisolid Tensile Properties of Al-Cu 206 Cast Alloys near Solidus Temperature
    Amir Bolouri
    Kun Liu
    X.-Grant Chen
    Metallurgical and Materials Transactions A, 2016, 47 : 6466 - 6480
  • [4] Effect of Mn, Si, and Cooling Rate on the Formation of Iron-Rich Intermetallics in 206 Al-Cu Cast Alloys
    Liu, K.
    Cao, X.
    Chen, X. -G.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2012, 43 (05): : 1231 - 1240
  • [5] Effect of Mn, Si, and Cooling Rate on the Formation of Iron-Rich Intermetallics in 206 Al-Cu Cast Alloys
    K. Liu
    X. Cao
    X.-G. Chen
    Metallurgical and Materials Transactions B, 2012, 43 : 1231 - 1240
  • [6] Tensile Fracture Behavior of Al-Cu Cast Alloys with Iron-Rich Intermetallic
    School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou
    510640, China
    不详
    550025, China
    Xiyou Jinshu, 1600, 3 (225-232):
  • [7] Tensile Properties of Al-Cu 206 Cast Alloys with Various Iron Contents
    Liu, K.
    Cao, X.
    Chen, X. -G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (05): : 2498 - 2507
  • [8] Tensile Properties of Al-Cu 206 Cast Alloys with Various Iron Contents
    K. Liu
    X. Cao
    X.-G. Chen
    Metallurgical and Materials Transactions A, 2014, 45 : 2498 - 2507
  • [9] Solid-State Transformation of Iron-Rich Intermetallic Phases in Al-Cu 206 Cast Alloys During Solution Heat Treatment
    Liu, K.
    Cao, X.
    Chen, X. -G.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (08): : 3494 - 3503
  • [10] Solid-State Transformation of Iron-Rich Intermetallic Phases in Al-Cu 206 Cast Alloys During Solution Heat Treatment
    K. Liu
    X. Cao
    X.-G. Chen
    Metallurgical and Materials Transactions A, 2013, 44 : 3494 - 3503
12345