Influence of Die Lubricants on Pickling and Conversion Treatment of High-Pressure Die-Cast AM30 Magnesium Alloy

被引：1
|
作者：
Blawert, Carsten [1 ]
da Conceicao, Thiago Ferreira [1 ]
Kainer, Karl Ulrich [1 ]
Izquierdo, Patrick [2 ]
Klose, Stephan G. [2 ]
Hoeche, Daniel [1 ]
机构：
[1] Helmholtz Zentrum Geesthacht HZG, Inst Mat Res, D-21502 Geesthacht, Germany
[2] Daimler AG, D-71059 Sindelfingen, Germany
来源：
ADVANCED ENGINEERING MATERIALS | 2012年 / 14卷 / 04期
关键词：
AUTOMOTIVE INDUSTRY; CORROSION; FILMS; XPS;
D O I：
10.1002/adem.201100259
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The pre-treatment of magnesium-based components plays an important role in surface engineering technology to guarantee good adhesion of the final coating system to the magnesium substrate in order to achieve good corrosion resistance. This paper focuses on the influence of two different die lubricantsone based on mineral oil, the other on siloxaneon the pickling and conversion treatment of an AM30 alloy. The surface conditions after casting, pickling, and conversion treatment were determined by X-ray-induced photoelectron spectroscopy, spark erosion, optical emission spectroscopy, IR spectroscopy, and scanning electron microscopy (including EDX). The influence of the different die lubricants on the result of the pickling treatment in terms of surface morphology and composition was significant. The mineraloil-based lubricant was found to be removed more easily and uniformly from the surface. Only sufficient removal of the die lubricants can guarantee homogeneous and uniform formation of the conversion coating.
引用
收藏
页码：227 / 235
页数：9
相关论文
共 50 条
  • [1] Macrosegregation in high-pressure die-cast AM60 alloy
    Lee, SG
    Gokhale, AM
    Patel, GR
    [J]. MAGNESIUM TECHNOLOGY 2005, 2005, : 377 - 380
  • [2] Predicting the influence of microporosity on the mechanical properties and fracture behavior of high-pressure die-cast AM50 magnesium alloy
    Sun, X.
    Cao, Z. Y.
    Liu, H. F.
    Jiang, W.
    Liu, L. P.
    [J]. APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV, 2014, 670-671 : 90 - 94
  • [3] Performance Evaluation of High-Pressure Die-Cast Magnesium Alloys
    Easton, Mark
    Zhu, Suming
    Gibson, Mark
    Abbott, Trevor
    Ang, Hua Qian
    Chen, Xiaobo
    Birbilis, Nick
    Savage, Gary
    [J]. MAGNESIUM TECHNOLOGY 2017, 2017, : 123 - 129
  • [4] Fatigue behavior of high-pressure die-cast magnesium alloys
    Bar-Yosef, O.
    Nagar, N.
    Gertsberg, G.
    Moscovitch, N.
    Ramati, S.
    Bronfin, B.
    [J]. MAGNESIUM TECHNOLOGY 2006, PROCEEDINGS, 2006, : 401 - +
  • [5] Characterization of the effects of process parameters on macro segregation in a high-pressure die-cast Magnesium alloy
    Lee, SG
    Patel, GR
    Gokhale, AM
    [J]. MATERIALS CHARACTERIZATION, 2005, 55 (03) : 219 - 224
  • [6] Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44
    S.M. Zhu
    J.F. Nie
    M.A. Gibson
    M.A. Easton
    P. Bakke
    [J]. Metallurgical and Materials Transactions A, 2012, 43 : 4137 - 4144
  • [7] Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44
    Zhu, S. M.
    Nie, J. F.
    Gibson, M. A.
    Easton, M. A.
    Bakke, P.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (11): : 4137 - 4144
  • [8] Martensite in die-cast magnesium alloy?
    Wei, Ying-hui
    Hou, Li-feng
    Xu, Bing-she
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 467 (1-2) : 130 - 134
  • [9] Microstructure and second-phase particles in low- and high-pressure die-cast magnesium alloy AM50
    Gertsman, VY
    Li, J
    Xu, S
    Thomson, JP
    Sahoo, M
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (08): : 1989 - 1997
  • [10] Microstructure and second-phase particles in low- and high-pressure die-cast magnesium alloy AM50
    Val Y. Gertsman
    Jian Li
    Su Xu
    James P. Thomson
    Mahi Sahoo
    [J]. Metallurgical and Materials Transactions A, 2005, 36 : 1989 - 1997
12345