Influence of carbon nanotube-polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene

被引:48
|
作者
Pollanen, Maija [1 ]
Pirinen, Sami [1 ]
Suvanto, Mika [1 ]
Pakkanen, Tuula T. [1 ]
机构
[1] Univ Eastern Finland, Dept Chem, Joensuu 80101, Finland
关键词
Carbon nanotubes; Polymer-matrix composites (PMCs); Thermal properties; Mechanical properties; Friction/wear; ELASTIC PROPERTIES; COMPOSITES; NANOCOMPOSITES; DISPERSION; BEHAVIOR; MODULUS; CRYSTALLIZATION; PERFORMANCE; STRESS; BLENDS;
D O I
10.1016/j.compscitech.2011.05.009
中图分类号
TB33 [复合材料];
学科分类号
摘要
Study was made of the effect of multiwall carbon nanotubes (MWCNTs) and polymeric compatibilizer on thermal, mechanical, and tribological properties of high density polyethylene (HDPE). The composites were prepared by melt mixing in two steps. Carbon nanotubes (CNTs) were melt mixed with maleic anhydride grafted polyethylene (PEgMA) as polymeric compatibilizer to produce a PEgMA-CNT masterbatch containing 20 wt% of CNTs. The masterbatch was then added to HOPE to prepare HOPE nanocomposites with CNT content of 2 or 6 wt%. The unmodified and modified (hydroxyl or amine groups) CNTs had similar effects on the properties of HDPE-PEgMA indicating that only non-covalent interactions were achieved between CNTs and matrix. According to SEM studies, single nanotubes and CNT agglomerates (size up to 1 1 mu m) were present in all nanocomposites regardless of content or modification of CNTs. Addition of CNTs to HDPE-PEgMA increased decomposition temperature, but only slight changes were observed in crystallization temperature, crystallinity, melting temperature, and coefficient of linear thermal expansion (CLTE). Young's modulus and tensile strength of matrix clearly increased, while elongation at break decreased. Measured values of Young's moduli of HDPE-PEgMA-CNT composites were between the values of Young's moduli for longitudinal (E-11) and transverse (E-22) direction predicted by Mod-Tanaka and Halpin-Tsai composite theories. Addition of CNTs to HDPE-PEgMA did not change the tribological properties of the matrix. Because of its higher crystallinity, PEgMA possessed significantly different properties from HOPE matrix: better mechanical properties, lower friction and wear, and lower CLTE in normal direction. Interestingly, the mechanical and tribological properties and CLTEs of HDPE-PEgMA-CNT composites lie between those of PEgMA and HOPE. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1353 / 1360
页数:8
相关论文
共 50 条
  • [1] The influence of a compatibilizer on the thermal and dynamic mechanical properties of PEEK/carbon nanotube composites
    Diez-Pascual, A. M.
    Naffakh, M.
    Gomez, M. A.
    Marco, C.
    Ellis, G.
    Gonzalez-Dominguez, J. M.
    Anson, A.
    Martinez, M. T.
    Martinez-Rubi, Y.
    Simard, B.
    Ashrafi, B.
    [J]. NANOTECHNOLOGY, 2009, 20 (31)
  • [2] Nanocomposites of poly(thioureaamide) with carbon nanotube: Influence on mechanical, thermal, and morphological properties
    Kausar, Ayesha
    Masbah-Ullah-Shah
    Hussain, Syed Tajammul
    Khan, Muhammad Yaqoob
    [J]. HIGH PERFORMANCE POLYMERS, 2013, 25 (07) : 813 - 821
  • [3] Morphological, mechanical, tribological, and thermal expansion properties of organoclay reinforced polyethylene composites
    Pollanen, Maija
    Suihkonen, Reija
    Nevalainen, Katja
    Koistinen, Arto P.
    Suvanto, Mika
    Vuorinen, Jyrki
    Pakkanen, Tuula T.
    [J]. POLYMER ENGINEERING AND SCIENCE, 2013, 53 (06): : 1279 - 1286
  • [4] The effect of carbon nanotube agglomeration on the thermal and mechanical properties of polyethylene oxide
    Narh, Kwabena A.
    Jallo, Laila
    Rhee, Kyong Y.
    [J]. POLYMER COMPOSITES, 2008, 29 (07) : 809 - 817
  • [5] INFLUENCE OF DEAGGLOMERATION STATES OF CARBON NANOTUBES ON THE THERMAL AND MECHANICAL PROPERTIES OF CARBON NANOTUBE-REINFORCED POLYETHYLENE OXIDE
    Narh, Kwabena A.
    Agwedicham, Ahmed-Tijani
    Jallo, Laila J.
    Rhee, Kyong Y.
    Lee, Ji H.
    [J]. INTERNATIONAL JOURNAL OF NANOSCIENCE, 2009, 8 (1-2) : 23 - 27
  • [6] Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer
    Palabiyik, M
    Bahadur, S
    [J]. WEAR, 2000, 246 (1-2) : 149 - 158
  • [7] INFLUENCE OF MIXING IN MECHANICAL PROPERTIES OF CLAY AND CARBON NANOTUBE AND HIGH DENSITY POLYETHYLENE
    Brandenburg, R. F.
    Lofi, A. R. H. C.
    Lepienski, C. M.
    Coelho, L. A. F.
    Becker, D.
    [J]. PROCEEDINGS OF PPS-29: THE 29TH INTERNATIONAL CONFERENCE OF THE POLYMER - CONFERENCE PAPERS, 2014, 1593 : 261 - 264
  • [8] Morphological, Thermal, and Mechanical Properties of Asphalt Binders Modified by Graphene and Carbon Nanotube
    Yu, Xiaokong
    Zadshir, Mehdi
    Yan, Jessie Ruixuan
    Yin, Huiming
    [J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2022, 34 (05)
  • [9] Influence of compatibilizer and additives on the mechanical properties of polyethylene-polystyrene blends
    Simitzis, J
    Paitontzis, C
    Economides, N
    [J]. POLYMERS & POLYMER COMPOSITES, 1995, 3 (06): : 427 - 434
  • [10] Predicting the effect of nano-structural parameters on the elastic properties of carbon nanotube-polymeric based composites
    [J]. Al-Oqla, Faris M. (fmaloqla@hu.edu.jo), 1600, Totem Publishers Ltd (13):