Effect of split sleeve cold expansion on cracking behaviors of titanium alloy TC4 holes

被引：56
|
作者：
Yan, W. Z. [1 ]
Wang, X. S. [1 ]
Gao, H. S. [1 ]
Yue, Z. F. [1 ]
机构：
[1] Northwestern Polytech Univ, Adv Mat Test Ctr, Sch Mech Civil Engn & Architecture, Xian 710129, Peoples R China
来源：
ENGINEERING FRACTURE MECHANICS | 2012年 / 88卷
基金：
国家高技术研究发展计划(863计划);
关键词：
Cold expansion; Fatigue performance; Crack propagation; Finite element; FATIGUE LIFE; SIMULATION; WORKING;
D O I：
10.1016/j.engfracmech.2012.04.008
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The effect of split sleeve cold expansion on fatigue behavior of titanium alloy TC4 open hole was investigated by experiment. After cold expansion, fatigue life of titanium alloy TC4 open hole was increased to 1.5-3.0 times. The residual compressive stress drastically retards the crack propagation rate, especially in the short crack stage. Corner crack initiated at the entrance face for cold expanded holes, while face crack initiated at the mid-plane of non-expanded holes. Finite element results showed that the lowest compression stress occurred at the entrance surface, while the largest one occurred near the middle of the hole wall. Crown Copyright (C) 2012 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：79 / 89
页数：11
相关论文
共 50 条
  • [1] Numerical and experimental investigation of the cold expansion process with split sleeve in titanium alloy TC4
    Yuan, X.
    Yue, Z. F.
    Wen, S. F.
    Li, L.
    Feng, T.
    INTERNATIONAL JOURNAL OF FATIGUE, 2015, 77 : 78 - 85
  • [2] Investigation on fatigue performance and microstructure of split sleeve cold expansion of TC4 holes
    Huang, Lei
    Wang, Shoucai
    Ma, Haikun
    Su, Ru
    Xu, Changzhou
    Liu, Wenzhong
    Wu, Dayong
    Kang, Jie
    ENGINEERING FRACTURE MECHANICS, 2024, 311
  • [3] Effects of Stress Amplitude and Cold Expansion Strengthening on the Fatigue Property of TC4 Titanium Alloy
    Wang, Qingtong
    Li, Bingbing
    Zheng, Yiming
    Chen, Xu
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (01) : 484 - 493
  • [4] Effect of α grain size on deformation behaviors of TC4 titanium alloy with equiaxed microstructure
    Cheng, Ming
    Zhao, Jian-Guo
    Song, Hong-Wu
    Zhang, Shi-Hong
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2009, 29 (01): : 22 - 26
  • [5] Study on the corrosion behaviors of MAO coated on TC4 titanium alloy
    Xi, Jian Jun
    Zhao, Jun
    ADVANCES IN ENVIRONMENTAL SCIENCE AND ENGINEERING, PTS 1-6, 2012, 518-523 : 632 - +
  • [6] Effect of split sleeve cold expansion on microstructure and fatigue performance of 7075-T6 aluminum alloy holes
    Wang, Chenguang
    Zou, Fan
    Zhou, Entao
    Fan, Zhilei
    Ge, Ende
    An, Qinglong
    Ming, Weiwei
    Chen, Ming
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 167
  • [7] Effect of thermohydrogen treatment on machinability of TC4 titanium alloy
    Hua, Xiao-Zhen
    Peng, Xin-Yuan
    Zhou, Xian-Liang
    Zou, Ai-Hua
    Cui, Xia
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, 32 (04): : 43 - 46
  • [8] Initiation and propagation behaviors of small fatigue crack in titanium alloy TC4
    Zhu L.
    Hu X.T.
    Jiang R.
    Song Y.D.
    Qu S.D.
    Key Engineering Materials, 2019, 795 : 9 - 14
  • [9] Effect of split-sleeve cold hole expansion on the fatigue performance of an additive manufactured TC18 alloy
    Yang, Kai
    Chen, Xiaohu
    Lv, Xuming
    Ding, Feng
    Dang, Bo
    Li, Fengkun
    Wei, Dongbo
    Zhang, Pingze
    JOURNAL OF MATERIALS RESEARCH, 2023, 38 (3) : 841 - 852
  • [10] Effect of split-sleeve cold hole expansion on the fatigue performance of an additive manufactured TC18 alloy
    Kai Yang
    Xiaohu Chen
    Xuming Lv
    Feng Ding
    Bo Dang
    Fengkun Li
    Dongbo Wei
    Pingze Zhang
    Journal of Materials Research, 2023, 38 : 841 - 852
12345