Pulping and papermaking properties of Tunisian Alfa stems (Stipa tenacissima)-Effects of refining process

The objective of this work is to study characteristics of chemical pulps (soda cooking process) and of paper obtained from Alfa, also known as Stipa tenacissima. For this purpose, Tunisian Alfa stems, and both unbleached and bleached pulps were characterized by determining their chemical composition as well as their morphological and physical properties. Through a detailed comparison with the other pulps obtained from various species, we show that the properties of Alfa stem fibres are intermediate between those of non-wood and wood plants, and most often close to those of Eucalyptus fibres. Refining process (PFI mill device) was then applied to the unbleached and bleached Alfa pulps. The modifications of the morphological properties of the fibres and the drainability and water retention values of the pulps were studied as a function of the refining degree. Here again, Alfa fibres exhibit a behaviour similar to that of Eucalyptus fibres, as the fibre shortening is very limited during the refining process. Finally, conventional handsheets with a basis weight of 65 g/m(2) were prepared from the unrefined and refined pulps. Their characterization showed that Alfa based papers present low density values and quite good mechanical properties, which are significantly enhanced by the refining treatment, particularly for the unbleached pulp. This study demonstrates the high potentiality of this non-wood species for papermaking applications. (C) 2011 Elsevier B.V. All rights reserved.