Modeling of Depth of Cut in Abrasive Waterjet Cutting of Thick Kevlar-Epoxy Composites

被引：2

作者：

Siddiqui, Tauseef Uddin ^{[1
]}

Shukla, Mukul ^{[1
]}

机构：

[1] Motilal Nehru Natl Inst Technol, Dept Mech Engn, Allahabad 211004, Uttar Pradesh, India

来源：

ADVANCES IN MATERIALS PROCESSING IX | 2010年 / 443卷

关键词：

AWJC; Depth of cut; Empirical model; Kevlar-epoxy composites; POLYMER MATRIX COMPOSITES; PREDICTIVE DEPTH; ALUMINA CERAMICS;

D O I：

10.4028/www.scientific.net/KEM.443.423

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Abrasive water jet cutting (AWJC) is one of the widely used non-conventional techniques for cutting difficult-to-cut materials like composites, super alloys and ceramics. However, while conducting initial trials the inability of the jet to cut through the workpiece is a major problem particularly in thicker materials. Therefore an accurate prediction of depth of cut (DOC) is absolutely necessary to achieve through cuts and more so to minimize delamination in polymer matrix composites. In this paper, a semi-empirical model is developed using non-linear regression analysis for prediction of DOC in AWJC of thick Kevlar-epoxy composites. Further, the model is verified by conducting experiments within the investigated range of process parameters and a good agreement is obtained between the two.

引用

页码：423 / 427

页数：5

共 50 条

[1] Abrasive waterjet hole trepanning of thick Kevlar-epoxy composites for ballistic applications - Experimental investigations and analysis using design of experiments methodology
Siddiqui T.U.
Shukla M.
[J]. International Journal of Machining and Machinability of Materials, 2011, 10 (03) : 172 - 186
[2] ARTIFICIAL NEURAL NETWORK MODELING OF CUT DEPTH IN ROCK CUTTING BY ABRASIVE WATERJET
Karakurt, Izzet
Aydin, Gokhan
Kaya, Serkan
Hamzacebi, Coskun
[J]. SCIENCE AND TECHNOLOGIES IN GEOLOGY, EXPLORATION AND MINING, SGEM 2015, VOL III, 2015, : 89 - 96
[3] MODELING OF THE INFLUENCE OF THE ABRASIVE WATERJET CUTTING PARAMETERS ON THE DEPTH OF CUT BASED ON FUZZY RULES
KOVACEVIC, R
FANG, M
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1994, 34 (01): : 55 - 72
[4] An Experimental Study on the Depth of Cut of Granite in Abrasive Waterjet Cutting
Karakurt, Izzet
Aydin, Gokhan
Aydiner, Kerim
[J]. MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (05) : 538 - 544
[5] Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics
Fan J.
[J]. International Journal of Abrasive Technology, 2010, 3 (03) : 238 - 258
[6] Development of Cuttability Abacuses in Abrasive Waterjet Cutting With Regard to Depth of Cut and Roughness of Cut Surfaces
Ozcelik, Y.
Engin, I. C.
[J]. JOURNAL OF TESTING AND EVALUATION, 2017, 45 (05) : 1809 - 1819
[7] A predictive depth of penetration model for abrasive waterjet cutting of polymer matrix composites
Wang, J
Guo, DM
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 121 (2-3) : 390 - 394
[8] Depth of cut models for multipass abrasive waterjet cutting of alumina ceramics with nozzle oscillation
Wang J.
[J]. Frontiers of Mechanical Engineering in China, 2010, 5 (1): : 19 - 32
[9] ENHANCING THE DEPTH OF CUT IN ABRASIVE WATERJET CUTTING OF ALUMINA CERAMICS BY USING MULTIPASS CUTTING WITH NOZZLE OSCILLATION
Wang, J.
Zhong, Y.
[J]. MACHINING SCIENCE AND TECHNOLOGY, 2009, 13 (01) : 76 - 91
[10] THERMAL-EXPANSION BEHAVIOR OF UNIDIRECTIONAL AND BIDIRECTIONAL KEVLAR-EPOXY COMPOSITES
STRIFE, JR
PREWO, KM
[J]. JOURNAL OF COMPOSITE MATERIALS, 1979, 13 (OCT) : 264 - 277

← 1 2 3 4 5 →