Density, Viscosity, Vapor Liquid Equilibrium, and Excess Molar Enthalpy of [Chloroform plus Methyl tert-Butyl Ether]

被引:23
|
作者
Clara, Rene A. [1 ]
Gomez Marigliano, Ana C. [1 ]
Morales, Diego [1 ]
Solimo, Horacio N. [1 ]
机构
[1] Univ Nacl Tucuman, Dept Fis, Fac Ciencias Exactas & Tecnol, RA-4000 San Miguel De Tucuman, Tucuman, Argentina
来源
关键词
REFRACTIVE-INDEX DEVIATIONS; BINARY-MIXTURES; SYSTEM; VOLUMES; MTBE; KPA;
D O I
10.1021/je100821g
中图分类号
O414.1 [热力学];
学科分类号
摘要
Density and viscosity measurements in the T = (273.15 to 318.15) K range of pure chloroform and methyl tert-butyl ether (MTBE), as well as of the binary system [xi chloroform + (1 x(1)) MTBE] over the whole concentration range at T = 293.15 K, were made. The experimental results for the pure components were fitted to empirical equations, which permit the calculation of these properties in the studied temperature range. Calculated values are in agreement with the experimental ones. Data of the binary mixture were further used to calculate the excess molar volume and viscosity deviations. The excess molar enthalpy at T = (303 +/- 1) K and vapor liquid equilibrium measurements at T = (303.15 +/- 0.05) K were also measured for the binary system. These last experimental results were used to calculate activity coefficients, the excess molar Gibbs energy, and excess molar entropy. This binary system shows strong negative deviations from ideality and exhibits a minimum pressure azeotrope, whose coordinates are: P = (26.30 +/- 0.05) kPa and xi = (0.586 +/- 0.002). Excess or deviation properties were fitted to the Redlich-Kister polynomial relation to obtain their coefficients and standard deviations. The vapor pressure of pure MTBE over the P = [(20.00 to 97.20) +/- 0.05] kPa range was also measured.
引用
收藏
页码:5862 / 5867
页数:6
相关论文
共 50 条