Design, Optimization, and Manufacturing of a Multiple-Thickness Profile Extrusion Die With a Cross Flow

被引：9

作者：

Shahreza, A. Rezaei ^{[2
]}

Behravesh, A. H. ^{[1
]}

Jooybari, M. Bakhshi ^{[3
]}

Soury, E. ^{[1
]}

机构：

[1] Tarbiat Modares Univ, Mech Engn Div, Fac Engn, Tehran, Iran

[2] Islamic Azad Univ, Branch Dehaghan, Mech Engn Div, Esfahan, Iran

[3] Babol Univ Technol, Dept Mech Engn, Bobol, Iran

来源：

POLYMER ENGINEERING AND SCIENCE | 2010年 / 50卷 / 12期

关键词：

D O I：

10.1002/pen.21770

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This article presents a procedure to achieve a uniform outlet flow of molten polymer for a complex die profile with various thicknesses in die outlet cross section. According to a specific optimization methodology, the die was optimized based on varying die land length. The scope of this article includes: 3D flow simulation, optimization of the die velocity outputs based on the results of simulation process, and comparison of numerical predictions with the experimental data. Finally a significant result obtained by this work indicates higher ratio of the land length to the height of the zone with cross flow rather than the zones that are directly fed by the extruder. POLYM. ENG. SCI., 50:2417-2424, 2010. (C) 2010 Society of Plastics Engineers

引用

页码：2417 / 2424

页数：8

共 50 条

[1] Optimization of a profile extrusion die for flow balance
Oktay Yilmaz
Hasan Gunes
Kadir Kirkkopru
Fibers and Polymers, 2014, 15 : 753 - 761
[2] Optimization of a Profile Extrusion Die for Flow Balance
Yilmaz, Oktay
Gunes, Hasan
Kirkkopru, Kadir
FIBERS AND POLYMERS, 2014, 15 (04) : 753 - 761
[3] Optimization of the flow distribution in extrusion die of plastic profile
Zhao, D. Y.
Wang, M. J.
Liu, B.
Song, M. C.
CURRENT DEVELOPMENT IN ABRASIVE TECHNOLOGY, PROCEEDINGS, 2006, : 393 - +
[4] Optimization design of Extrusion die channels for Polymer Profile
Wang, Qibing
Wang, Zhiming
Peng, Anhua
MANUFACTURING PROCESSES AND SYSTEMS, PTS 1-2, 2011, 148-149 : 1726 - 1729
[5] Optimization design method of extrusion die for complex profile
Key Laboratory for Precision and Non-Traditional Machining Technology, Dalian University of Technology, Dalian 116024, China
不详
Dalian Ligong Daxue Xuebao, 2008, 2 (198-204):
[6] Design and fabrication of a multiple-thickness electrochemical cantilever sensor
Wu, Chang
Petrini, Valerie
Joseph, Eric
Amiot, Fabien
MICROELECTRONIC ENGINEERING, 2014, 119 : 1 - 5
[7] Design and fabrication of a multiple-thickness electrochemical cantilever sensor
Wu, Chang
Petrini, Valérie
Joseph, Eric
Amiot, Fabien
Microelectronic Engineering, 2014, 119 : 1 - 5
[8] Optimization design of baffle plates in porthole die for aluminium profile extrusion
Zhang, C.
Zhao, G.
Sun, X.
Chen, H.
Gao, B.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2011, 225 (L4) : 255 - 265
[9] Optimization of die bearing for aluminum profile extrusion die
Lin, Gao-Yong
Chen, Xing-Ke
Jiang, Jie
Wang, Fang
Yang, Li-Bin
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2006, 16 (04): : 561 - 566
[10] Internal flow optimization in a complex profile extrusion die using flow restrictors and flow separators
Jingyang Xing
Majed Alsarheed
Animesh Kundu
John P. Coulter
The International Journal of Advanced Manufacturing Technology, 2022, 119 : 4939 - 4950

← 1 2 3 4 5 →