Thermal analysis of a miniature magnetic fluid seal installed in an implantable rotary pump

被引：7
|
作者：
Mitamura, Yoshinori [1 ]
Nishimura, Ikuya [1 ]
Yano, Tetsuya [2 ]
机构：
[1] Hokkaido Univ, Grad Sch Informat Sci & Technol, Kita Ku, Kita 14-jo Nishi 9-chome, Sapporo, Hokkaido 0600814, Japan
[2] Hirosaki Univ, Fac Sci & Technol, 3 Bunkyo cho,Hirosaki shi, Hirosaki, Aomori 0368560, Japan
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2022年 / 548卷
关键词：
Magnetic fluid seal; Thermal analysis; Temperature; Implantable medical device; DISSIPATION;
D O I：
10.1016/j.jmmm.2021.168977
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The capacity of a magnetic fluid (MF) seal is decreased by increased MF temperature. A cooling system for MF is limited in a miniature MF seal installed in an implantable rotary pump. MF temperature in an MF seal installed in an implantable rotary pump was studied.The temperature of MF in a rotary pump was measured in vitro. Also, steady-state thermal analyses were conducted for an implantable rotary pump model. The results showed that (1) the decrease in magnetization of an MF due to increased temperature is negligible when the heat transfer coefficient of the seal housing is greater than 500 W/(m2.K) and (2) the increased temperature is mainly due to heat flux from the motor, and the magnitude of temperature increase due to viscous friction in the MF is low.In conclusion, an MF seal can be used in an implantable rotary pump from the standpoint of heat characteristics.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] A magnetic fluid seal for rotary blood pumps: Behaviors of magnetic fluids in a magnetic fluid seal
    Mitamura, Yoshinori
    Yano, Tetsuya
    Nakamura, Wataru
    Okamoto, Eiji
    [J]. BIO-MEDICAL MATERIALS AND ENGINEERING, 2013, 23 (1-2) : 63 - 74
  • [2] A MAGNETIC FLUID SEAL FOR ROTARY BLOOD PUMPS: BEHAVIORS OF MAGNETIC FLUIDS IN A MAGNETIC FLUID SEAL WITH A SHIELD
    Mitamura, Y.
    Yano, T.
    Nakamura, W.
    Okamoto, E.
    [J]. MAGNETOHYDRODYNAMICS, 2013, 49 (3-4): : 525 - 529
  • [3] Miniature magnetic fluid seal working in liquid environments
    Mitamura, Yoshinori
    Durst, Christopher A.
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2017, 431 : 285 - 288
  • [4] Application of a magnetic fluid seal to rotary blood pumps
    Mitamura, Y.
    Arioka, S.
    Sakota, D.
    Sekine, K.
    Azegami, M.
    [J]. JOURNAL OF PHYSICS-CONDENSED MATTER, 2008, 20 (20)
  • [5] Development and initial performance of a miniature axial flow blood pump using magnetic fluid shaft seal
    Eiji Okamoto
    Tetsuya Yano
    Kazumitsu Sekine
    Yusuke Inoue
    Yasuyuki Shiraishi
    Tomoyuki Yambe
    Yoshinori Mitamura
    [J]. Journal of Artificial Organs, 2023, 26 : 12 - 16
  • [6] Development and initial performance of a miniature axial flow blood pump using magnetic fluid shaft seal
    Okamoto, Eiji
    Yano, Tetsuya
    Sekine, Kazumitsu
    Inoue, Yusuke
    Shiraishi, Yasuyuki
    Yambe, Tomoyuki
    Mitamura, Yoshinori
    [J]. JOURNAL OF ARTIFICIAL ORGANS, 2023, 26 (01) : 12 - 16
  • [7] Structural design and parameter analysis of a modular magnetic fluid rotary seal for robot joints
    Chen, Jiazhen
    Guan, Yisheng
    Xu, Wang
    Zhang, Tao
    [J]. VACUUM, 2023, 212
  • [8] Sealing Performance of a Magnetic Fluid Seal for Rotary Blood Pumps
    Mitamura, Yoshinori
    Takahashi, Sayaka
    Kano, Kentaro
    Okamoto, Eiji
    Murabayashi, Shun
    Nishimura, Ikuya
    Higuchi, Taka-aki
    [J]. ARTIFICIAL ORGANS, 2009, 33 (09) : 770 - 773
  • [9] Optimization of Design Parameters Affecting the Performance of a Magnetic Fluid Rotary Seal
    Parmar, Saurabh
    Upadhyay, R. V.
    Parekh, Kinnari
    [J]. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2021, 46 (03) : 2343 - 2348
  • [10] Optimization of Design Parameters Affecting the Performance of a Magnetic Fluid Rotary Seal
    Saurabh Parmar
    R. V. Upadhyay
    Kinnari Parekh
    [J]. Arabian Journal for Science and Engineering, 2021, 46 : 2343 - 2348
12345