FLOW REGIMES AND VERTICAL SOLIDS CONVEYING IN A SPOUT-FLUID BED WITH A DRAFT TUBE

被引：30
|
作者：
Nagashima, Hiroshi [1 ]
Ishikura, Toshifumi [1 ]
Ide, Mitsuharu [1 ]
机构：
[1] Fukuoka Univ, Dept Chem Engn, Jonan Ku, Fukuoka 8140180, Japan
来源：
CANADIAN JOURNAL OF CHEMICAL ENGINEERING | 2011年 / 89卷 / 02期
关键词：
spout-fluid bed; draft tube; flow regime; pressure fluctuation; solids loading ratio; PRESSURE-FLUCTUATIONS; COARSE PARTICLES; CIRCULATION RATE; VELOCITY; HYDRODYNAMICS; CHOKING; SYSTEMS; ANNULUS;
D O I：
10.1002/cjce.20403
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Pressure fluctuation data were obtained in a semi-cylindrical spout-fluid bed with draft tube, and statistical analyses of them were employed to recognise flow regimes. Also, the effects of spouting-gas and auxiliary-gas velocities, and length of entrainment zone on solids loading ratio in a draft tube were examined. As a result, five flow regimes appeared by changing spouting-gas and auxiliary-gas velocities and it was found that the simplest method to determine flow regime is to measure pressure fluctuations in a draft tube. Moreover, solids loading ratio could be controlled flexibly by auxiliary-gas velocity and length of entrainment zone.
引用
收藏
页码：264 / 273
页数：10
相关论文
共 50 条
  • [1] Annulus leakage and distribution of the fluid flow in a liquid spout-fluid bed with a draft tube
    Erbil, AÇ
    CHEMICAL ENGINEERING SCIENCE, 2003, 58 (20) : 4739 - 4745
  • [2] Solids circulation flux and gas bypassing in a pressurized spout-fluid bed with a draft tube
    Xiao, R
    Zhang, MY
    Jin, BS
    Liu, XD
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2002, 80 (05): : 800 - 808
  • [3] Hydrodynamics of spout-fluid bed with draft tube at elevated pressure
    Xiao, Rui
    Zhang, Mingyao
    Liu, Xiangdong
    Chen, Xiaoping
    Acta Mechanica Sinica/Lixue Xuebao, 1998, 14 (02): : 223 - 230
  • [4] MINIMUM SPOUTING VELOCITY IN A SPOUT-FLUID BED WITH A DRAFT TUBE
    Xu, Jian
    Tang, Junli
    Wei, Weisheng
    Bao, Xiaojun
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2009, 87 (02): : 274 - 278
  • [5] Encapsulation of Orange Essential Oil in a Spout-Fluid Bed Dryer with a Draft Tube on a Bed of Inert Solids
    Velazquez-Contreras, Claudia
    Osorio-Revilla, Guillermo
    Gallardo-Velazquez, Tzayhri
    DRYING TECHNOLOGY, 2014, 32 (14) : 1718 - 1726
  • [6] The minimum spouting velocity of spout-fluid bed with a draft tube
    Wang, Guosheng
    Xue, Huifang
    Wang, Hongxin
    Zhang, Huaiqing
    Zhang, Zheng
    Huaxue Fanying Gongcheng Yu Gongyi/Chemical Reaction Engineering and Technology, 14 (03):
  • [7] SOLIDS CIRCULATION IN A SPOUT FLUID BED WITH DRAFT TUBE
    BERRUTI, F
    MUIR, JR
    BEHIE, LA
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1988, 66 (06): : 919 - 923
  • [8] Study on the flow behavior of irregular plastic particles in a spout-fluid bed with a draft tube
    Wu, Man
    Guo, Qingjie
    Zhao, Meijie
    Chen, Yizhong
    PARTICULATE SCIENCE AND TECHNOLOGY, 2018, 36 (08) : 945 - 954
  • [9] Hydrodynamic Performance of a Spout-Fluid Bed with Draft Tube at Different Temperatures
    Wu, Man
    Guo, Qingjie
    Liu, Luyan
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2014, 53 (05) : 1999 - 2010
  • [10] Hydrodynamic Behavior of Gas and Particles in a Spout-Fluid Bed with a Draft Tube
    Nagashima, Hiroshi
    Ishikura, Toshifumi
    Ide, Mitsuharu
    KAGAKU KOGAKU RONBUNSHU, 2010, 36 (04) : 371 - 378
12345