Modeling and experimental validation of a triple-screw pump for internal combustion engine cooling

被引:11
|
作者
Di Giovine, G. [1 ]
Mariani, L. [1 ]
Di Battista, D. [1 ]
Cipollone, R. [1 ]
Fremondi, F. [2 ]
机构
[1] Univ Aquila, Dipartimento Ingn Ind & Informaz & Econ, Ple Pontieri 1, I-67100 Laquila, Italy
[2] Metelli SpA, Via Bonotto 3-5, I-25033 Cologne, BS, Italy
关键词
Engine cooling; Triple-screw pump; Mathematical model; CO2; reduction; VANE ROTARY PUMP; PRESSURE LOADS; ELECTRIC VEHICLES; WARM-UP; OPTIMIZATION; EMISSIONS; DESIGN; SIMULATION; PROFILE; HEAT;
D O I
10.1016/j.applthermaleng.2021.117550
中图分类号
O414.1 [热力学];
学科分类号
摘要
Internal Combustion Engine (ICE) cooling system is receiving a new technological interest for the influence it has on primary harmful and CO2 emissions reduction. Improvements on pump efficiency are requested to reduce its required energy during real on-the-road operation. Present technology always considers centrifugal pumps whose efficiency is highly dependent on rotational speed: consequently, pumps designed to have a very high efficiency at design point, show poor performances during usual operation, wasting energy. This study aims to assess the screws pumps potentiality to substitute the traditional centrifugal pumps for engine cooling. The main advantage is that positive displacement pumps have an efficiency ideally nondependent on rotational speed, flow rate and head delivered, so having requirements that can fit more the engine cooling features. A novel comprehensive zero-dimensional mathematical model has been formulated to predict the performances of triple-screw pumps, in terms of volumetric, indicated and mechanical efficiency as a function of main operating conditions of the pump. A wide experimental activity has been done, resulting in a good agreement with predictions in spite of the manufacture of the pump, which privileges a low-cost solution as it is requested for the specific sectors of application. The model, once experimentally validated, demonstrates a high validity as virtual platform for a model-based design, thus offering the possibility to include design aspects particularly suitable for engine cooling systems. At last, by simulating the World Harmonized Transient Cycle on an F1C IVECO 3l engine, the triple-screw pump shows an average efficiency about 8% greater than that of the centrifugal pump, leading to an energy saving equal to 18.5%. This result leads the way to the use of screws pumps also in the engine cooling system of an on-the-road vehicle, which could represent a new potential application, never considered before.
引用
收藏
页数:19
相关论文
共 50 条
  • [1] An innovative triple-screw pump for engine cooling in the road transportation sector
    Di Giovine, Giammarco
    Di Bartolomeo, Marco
    Cipollone, Roberto
    ENERGY, 2024, 304
  • [2] Efficiency of a triple-screw pump having screws with differing profiles
    V. M. Ryazantsev
    Chemical and Petroleum Engineering, 1999, 35 : 46 - 49
  • [3] ENERGY ANALYSIS OF COOLING PUMP IN INTERNAL COMBUSTION ENGINE
    Mahlia, T. M. I.
    Husnawan, M.
    Masjuki, H. H.
    Chow, K. V.
    Low, T. S.
    Liaw, A. W. J.
    IMECE 2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2008, VOL 8, 2009, : 249 - 253
  • [5] Modeling of the internal combustion engine cooling system
    Kneba, Zbigniew
    ARCHIVES OF THERMODYNAMICS, 2019, 40 (03) : 109 - 121
  • [6] Determining the repair width and CNC grinding of screws of triple-screw pump
    Yongqiang Zhao
    Shengdun Zhao
    Hongling Hou
    Jingxiang Li
    Weifeng Wei
    The International Journal of Advanced Manufacturing Technology, 2018, 97 : 389 - 400
  • [7] Determining the repair width and CNC grinding of screws of triple-screw pump
    Zhao, Yongqiang
    Zhao, Shengdun
    Hou, Hongling
    Li, Jingxiang
    Wei, Weifeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (1-4): : 389 - 400
  • [8] Determining the repair width and CNC grinding of screws of triple-screw pump
    Zhao, Yongqiang (zyq0620@163.com), 1600, Springer London (97): : 1 - 4
  • [9] Experimental Validation of Simulink-Based Internal Combustion Engine Modeling Framework
    Thompson, Bradley
    Yoon, Hwan-Sik
    SAE INTERNATIONAL JOURNAL OF ENGINES, 2023, 16 (02) : 247 - 263
  • [10] Numerical Simulation of Unstable Flow in Cooling Pump of Internal Combustion Engine
    Shen, Chunhao
    Zhang, Haoyang
    Si, Qiaorui
    Xia, Shuijing
    Huang, Kaile
    Yuan, Jianping
    2019 5TH INTERNATIONAL CONFERENCE ON ENERGY EQUIPMENT SCIENCE AND ENGINEERING, 2020, 461