Effects of Si addition on the oxidation behavior of a Cu-Zr-based bulk metallic alloy

被引：15
|
作者：
Kai, W. [1 ]
Kao, P. C. [1 ]
Lin, P. C. [1 ]
Ren, I. F. [1 ]
Jang, J. S. C. [2 ]
机构：
[1] Natl Taiwan Ocean Univ, Inst Mat Engn, Chilung 202, Taiwan
[2] Natl Cent Univ, Dept Mech Engn, Tao Yuan 320, Taiwan
来源：
INTERMETALLICS | 2010年 / 18卷 / 10期
关键词：
Oxidation; Glasses; metallic; GLASS-FORMING ABILITY; AMORPHOUS-ALLOYS; AIR;
D O I：
10.1016/j.intermet.2010.03.005
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The effect of Si addition on the oxidation of (Cu(43)Zr(43)Al(7)Ag(7))(99.5)Si(0.5) bulk metallic glass (CZ43S-BMG) was investigated over the temperature range of 375-500 degrees C in dry air. The results generally showed that the oxidation rates of the CZ43S-BMG followed a multi-stage parabolic-rate law, and the oxidation rate constants (k(p) values) fluctuated with increasing temperature. It was found that the k(p) values of the CZ43S-BMG were slightly slower than those of the Si-free glassy alloy (Cu(43)Zr(43)Al(7)Ag(7), named as CZ43-BMG). The scales formed on the CZ43S-BMG strongly depend on temperature, consisting of 3 different modifications of ZrO(2) and CuO, and minor amounts of Cu(2)O (formed at T >= 425 degrees C) and Al(2)O(3) (only detected at 500 degrees C). In addition, the glassy substrate remained amorphous nature at T <= 400 degrees C, while it transferred to the crystalline phases of Cu(10)Zr(7), ZrAl, and ZrSi(2) after the oxidation at higher temperatures. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：1994 / 1999
页数：6
相关论文
共 50 条
  • [1] Transition from plasticity to brittleness in Cu-Zr-based bulk metallic glasses
    Zhang, Qingsheng
    Zhang, Wei
    Inoue, Akihisa
    MATERIALS TRANSACTIONS, 2007, 48 (06) : 1272 - 1275
  • [2] Rheological behavior of Cu-Zr-based metallic glass in the supercooled liquid region
    Cui, J.
    Li, J. S.
    Wang, J.
    Kou, H. C.
    Qiao, J. C.
    Gravier, S.
    Blandin, J. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 592 : 189 - 195
  • [3] Cu metallization of the surface of Cu-Zr-based metallic glass
    Terajima, T. (terajima@jwri.osaka-u.ac.jp), 1600, Elsevier Ltd (536):
  • [4] Cu metallization of the surface of Cu-Zr-based metallic glass
    Terajima, Takeshi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 536 : S113 - S116
  • [5] New Cu-Zr-based bulk metallic glasses with large diameters of up to 1.5 cm
    Zhang, Qingsheng
    Zhang, Wei
    Inoue, Akihisa
    SCRIPTA MATERIALIA, 2006, 55 (08) : 711 - 713
  • [6] Effect of Al and Ag addition on phase formation, thermal stability, and mechanical properties of Cu-Zr-based bulk metallic glasses
    Barekar, Nilam
    Gargarella, Piter
    Song, Kaikai
    Pauly, Simon
    Kuehn, Uta
    Eckert, Juergen
    JOURNAL OF MATERIALS RESEARCH, 2011, 26 (14) : 1702 - 1710
  • [7] Unusual plasticity of the particulate-reinforced Cu-Zr-based bulk metallic glass composites
    Zhang, Qingsheng
    Zhang, Wei
    Xie, Guoqiang
    Inoue, Akihisa
    MATERIALS TRANSACTIONS, 2007, 48 (09) : 2542 - 2544
  • [8] An experimental investigation on the notch toughness of Cu-Zr-based bulk metallic glasses with in-situ crystallization
    Andersen, Laura M.
    Faulhaber, Sabine
    Harrington, Tyler
    Hofmann, Douglas C.
    Cheng, Huikai
    Vecchio, Kenneth S.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2017, 469 : 70 - 78
  • [9] Effect of Tantalum Addition on Properties of Cu-Zr-Based Thin Film Metallic Glasses (TFMGs)
    Achache, Sofiane
    Sanchette, Frederic
    COATINGS, 2020, 10 (06)
  • [10] Dependence of Ductility on Free Volume in a Cu-Zr-Based Metallic Glass
    Jiang, Feng
    Zhao, Yanglei
    Zhang, Lincai
    Pan, Shibin
    Zhou, Yinggang
    He, Lin
    Sun, Jun
    ADVANCED ENGINEERING MATERIALS, 2009, 11 (03) : 177 - 181
12345