The analysis of flow behavior of Ti-6Al-2Sn-4Zr-6Mo alloy based on the processing maps

被引：19
|
作者：
Lypchanskyi, Oleksandr [1 ]
Sleboda, Tomasz [1 ]
Wojtaszek, Marek [1 ]
Muszka, Krzysztof [1 ]
Lukaszek-Solek, Aneta [1 ]
Stanik, Rafal [2 ]
Gude, Maik [2 ]
机构：
[1] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, Av Mickiewicza 30, PL-30059 Krakow, Poland
[2] Tech Univ Dresden, Inst Lightweight Engn & Polymer Technol ILK, Dresden, Germany
来源：
INTERNATIONAL JOURNAL OF MATERIAL FORMING | 2021年 / 14卷 / 04期
关键词：
Ti-6246; alloy; Processing maps; Microstructure; Forging; Computed tomography; HOT DEFORMATION-BEHAVIOR; INSTABILITY CRITERIA; BETA-PHASE; DWELL-FATIGUE; MICROSTRUCTURE;
D O I：
10.1007/s12289-019-01533-z
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents the analysis of hot deformation behavior of Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) alloy using the theory of dynamic material modeling (DMM) based on hot compression tests performed to a total true strain of 1 at the strain rates from 0.01 to 100 s(-1) and at the temperatures within the range between 800 and 1100 degrees C. The processing maps according to the Prasad's criterion were developed. The analysis of the processing maps allowed for the placement of domains describing the areas of potentially favorable combinations of hot deformation parameters. The microstructure observations of the investigated alloy specimens after hot deformation in stability and instability areas were conducted. The optimal processing parameters for numerical modeling of Ti-6246 alloy forging were selected based on processing maps. After complex analysis of the obtained results, microstructural observations and numerical modeling of forging of selected part, the forging tests of Ti-6246 alloy were realized. The obtained product quality assessment was carried out by computed tomography non-destructive testing.
引用
收藏
页码：523 / 532
页数：10
相关论文
共 50 条
  • [1] The analysis of flow behavior of Ti-6Al-2Sn-4Zr-6Mo alloy based on the processing maps
    Oleksandr Lypchanskyi
    Tomasz Śleboda
    Marek Wojtaszek
    Krzysztof Muszka
    Aneta Łukaszek-Sołek
    Rafał Stanik
    Maik Gude
    International Journal of Material Forming, 2021, 14 : 523 - 532
  • [2] SUPERPLASTICITY IN TI-6AL-2SN-4ZR-6MO ALLOY
    HASEGAWA, A
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1610 - 1610
  • [3] HYDROGEN EMBRITTLEMENT OF TI-6AL-2SN-4ZR-6MO ALLOY
    NIINOMI, M
    SUZUKI, K
    KOBAYASHI, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (08) : B286 - B286
  • [4] HYDROGEN EMBRITTLEMENT OF TI-6AL-2SN-4ZR-6MO ALLOY
    NIINOMI, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S738 - S738
  • [5] Anisotropy in the tensile behaviour of Ti-6Al-2Sn-4Zr-6Mo alloy
    Corzo, M
    Manero, JM
    Anglada, M
    Mateo, A
    REVISTA DE METALURGIA, 2005, : 401 - 406
  • [6] Characterization of the α⇆ βtransformations in a Ti-6Al-2Sn-4Zr-6Mo (wt.%) alloy
    Tarin, P.
    Alonso, I.
    Simon, A. G.
    Badia, J. M.
    Piris, N. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 481 (559-561): : 559 - 561
  • [7] IMPACT TOUGHNESS OF HYDROGEN CHARGED TI-6AL-2SN-4ZR-6MO ALLOY
    NIINOMI, M
    SUZUKI, K
    KOBAYASHI, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (10): : 1405 - 1412
  • [8] Development of a Free-Machining (+) Titanium Alloy Based on Ti-6Al-2Sn-4Zr-6Mo
    Hussain, M. S.
    Siemers, C.
    Roesler, J.
    MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (05) : 545 - 549
  • [9] Ultrasonically assisted turning of Ti-6Al-2Sn-4Zr-6Mo
    Muhammad, R.
    Maurotto, A.
    Roy, A.
    Silberschmidt, V. V.
    MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS 2012 (MPSVA 2012), 2012, 382
  • [10] DEHYDRIDING OF TI-6AL-2SN-4ZR-6MO HYDRIDE POWDER
    BIRLA, NC
    DEPIERRE, V
    POWDER METALLURGY, 1975, 18 (35) : 15 - 31
12345