Mechanical Properties and In Situ Deformation Imaging of Microlattices Manufactured by Laser Based Powder Bed Fusion

被引:30
|
作者
Du Plessis, Anton [1 ]
Kouprianoff, Dean-Paul [2 ]
Yadroitsava, Ina [2 ]
Yadroitsev, Igor [2 ]
机构
[1] Stellenbosch Univ, CT Scanner Facil, ZA-7602 Stellenbosch, South Africa
[2] Cent Univ Technol, Dept Mech Engn, ZA-9300 Bloemfontein, South Africa
基金
新加坡国家研究基金会;
关键词
laser powder bed fusion; additive manufacturing; X-ray tomography; in-situ imaging; Ti6Al4V; lattice structures; CELL POROUS BIOMATERIALS; LATTICE STRUCTURES; UNIT CELLS; BEHAVIOR; IMPLANTS;
D O I
10.3390/ma11091663
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This paper reports on the production and mechanical properties of Ti6Al4V microlattice structures with strut thickness nearing the single-track width of the laser-based powder bed fusion (LPBF) system used. Besides providing new information on the mechanical properties and manufacturability of such thin-strut lattices, this paper also reports on the in situ deformation imaging of microlattice structures with six unit cells in every direction. LPBF lattices are of interest for medical implants due to the possibility of creating structures with an elastic modulus close to that of the bones and small pore sizes that allow effective osseointegration. In this work, four different cubes were produced using laser powder bed fusion and subsequently analyzed using microCT, compression testing, and one selected lattice was subjected to in situ microCT imaging during compression. The in situ imaging was performed at four steps during yielding. The results indicate that mechanical performance (elastic modulus and strength) correlate well with actual density and that this performance is remarkably good despite the high roughness and irregularity of the struts at this scale. In situ yielding is visually illustrated.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion
    Atabay, Sila Ece
    Sanchez-Mata, Oscar
    Muniz-Lerma, Jose Alberto
    Gauvin, Raynald
    Brochu, Mathieu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773 (773):
  • [2] Microstructure and mechanical properties of Haynes 188 alloy manufactured by laser powder bed fusion
    Liu, Yang
    Huang, Zhifeng
    Zhang, Chi
    Lu, Jiaqi
    Ouyang, Ni
    Shen, Qiang
    Huang, Aijun
    Chen, Fei
    MATERIALS CHARACTERIZATION, 2024, 211
  • [3] Mechanical Properties of AlSi12 Alloy Manufactured by Laser Powder Bed Fusion Technique
    Masaaki Kimura
    Akihiro Hirayama
    Junya Yoshioka
    Hosei Maekawa
    Masahiro Kusaka
    Koichi Kaizu
    Tsuyoshi Takahashi
    Journal of Failure Analysis and Prevention, 2020, 20 : 1884 - 1895
  • [4] Mechanical Properties of Bulk Metallic Glasses Additively Manufactured by Laser Powder Bed Fusion: A Review
    Luo, Haojie
    Du, Yulei
    MATERIALS, 2023, 16 (21)
  • [5] Mechanical Properties of AlSi12 Alloy Manufactured by Laser Powder Bed Fusion Technique
    Kimura, Masaaki
    Hirayama, Akihiro
    Yoshioka, Junya
    Maekawa, Hosei
    Kusaka, Masahiro
    Kaizu, Koichi
    Takahashi, Tsuyoshi
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2020, 20 (06) : 1884 - 1895
  • [6] Titanium Alloys Manufactured by In Situ Alloying During Laser Powder Bed Fusion
    I. Yadroitsev
    P. Krakhmalev
    I. Yadroitsava
    JOM, 2017, 69 : 2725 - 2730
  • [7] Titanium Alloys Manufactured by In Situ Alloying During Laser Powder Bed Fusion
    Yadroitsev, I.
    Krakhmalev, P.
    Yadroitsava, I.
    JOM, 2017, 69 (12) : 2725 - 2730
  • [8] Parameter optimization and mechanical properties of 42CrMo4 manufactured by laser powder bed fusion
    Chuan Shi
    Stefan Dietrich
    Volker Schulze
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 1899 - 1913
  • [9] Parameter optimization and mechanical properties of 42CrMo4 manufactured by laser powder bed fusion
    Shi, Chuan
    Dietrich, Stefan
    Schulze, Volker
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (3-4): : 1899 - 1913
  • [10] Microstructures and mechanical properties of pure copper manufactured by high-strength laser powder bed fusion
    Wei, Yi
    Chen, Genyu
    Xiao, Zhikang
    Zhang, Yi
    Zhou, Yunlong
    Liu, Xufei
    Li, Wei
    Xu, Jianbo
    Optics and Laser Technology, 2025, 182