Design of switching power with N+1 hot standby

被引：0
|
作者：
Jin, YW [1 ]
Zhang, FL [1 ]
Wang, CL [1 ]
机构：
[1] Ordnance Engn Coll, Dept Elect Engn, Shijiazhuang, Hebei, Peoples R China
来源：
ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings | 2005年
关键词：
D O I：
暂无
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
In this paper, a kind of power, the high frequency switching power system, is introduced. This power system overcomes the shortcoming of phase-controlled power, especially in its construction of modularization, design of N+1 hot standby. This system contains rectifier module and monitor module. The monitor module takes charge of controlling each rectifier module and communicating with the hoer monitor system. it can realize remote-detecting, remote-controlling, remote-adjustment. Monitor module takes on the management of the system. It sends out control command and acquires the operating situation of rectifier module. The system contains N+1 rectifier module, there is no main rectifier module, ad modules are in same authority, they output almost same power. if one module is invalidated the other will take charge of the burden of the invalidate one, so the reliability of the system is high than usual.
引用
收藏
页码：9374 / 9377
页数：4
相关论文
共 50 条
  • [1] Unipower Europe - New hot-swop N+1 power system
    不详
    ELECTRONIC ENGINEERING, 1998, 70 (855): : 46 - 46
  • [2] 从(n+1)/n×(n+1)=(n+1)/n+(n+1)谈起
    何志俊
    中学生数学, 2004, (06) : 11 - 12
  • [3] Reliability analysis of an (N+1)-unit standby system with 'preemptive priority' rule
    Zhang, YH
    MICROELECTRONICS AND RELIABILITY, 1996, 36 (01): : 19 - 26
  • [4] Reliability analysis of an (N+1)-unit standby system with 'preemptive priority' rule
    Beijing Univ of Science and, Technology, Beijing, China
    Microelectron Reliab, 1 (19-26):
  • [5] 关于方程xn/（n+1）+yn/（n+1）+zn/（n+1）=an/（n+1）的图形特征
    赵建中
    六安师专学报, 1999, (02) : 25 - 26
  • [6] COMBINE DISTRIBUTED POWER WITH N+1 REDUNDANCY
    GARCIA, JD
    BROWN, BG
    ELECTRONIC PRODUCTS MAGAZINE, 1994, 36 (10): : 23 - 24
  • [7] Impact of low-standby-power device design on hot carrier reliability
    Murakami, E
    Umeda, K
    Yamanaka, T
    Kimura, S
    Aono, H
    Makabe, K
    Okuyama, K
    Ohji, Y
    Yoshida, Y
    Minami, M
    Kuroda, K
    Ikeda, S
    Kubota, K
    2001 SYMPOSIUM ON VLSI TECHNOLOGY, DIGEST OF TECHNICAL PAPERS, 2001, : 119 - 120
  • [8] Reliability of 1-out-of-(n+1) warm standby systems subject to fault level coverage
    Peng, R. (pengrui1988@gmail.com), 1600, RAMS Consultants (09):
  • [9] 1/(n(n+1))=1/n-1/(n+1)的应用
    刘运宜
    中学生数学, 2012, (18) : 11 - 12
  • [10] On the action of the groups GL(n+1,q), PGL(n+1,q), SL(n+1,q) and PSL(n+1,q) on PG(n,qt)
    Brown, JMN
    DESIGNS CODES AND CRYPTOGRAPHY, 2004, 32 (1-3) : 45 - 50
12345