Effect of Magnetic Field on Air Film Continuous Casting

被引：1
|
作者：
Qu, Fu [1 ]
Cui, Jianzhong [1 ]
机构：
[1] Northeastern Univ, Key Lab Electromagnet Proc Mat, Minist Educ, Shenyang 11000, Peoples R China
来源：
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5 | 2011年 / 189-193卷
关键词：
Air Film Casting; Meniscus; Static Magnetic Field; Surface Quality; FREQUENCY ELECTROMAGNETIC-FIELD; ALUMINUM-ALLOYS; CREM PROCESS; MICROSTRUCTURES;
D O I：
10.4028/www.scientific.net/AMR.189-193.2827
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influences of low frequency magnetic field and static magnetic field on the air film casting process are studied in this paper. 6063 aluminum alloy ingot of 174-mm diameter were produced by electromagnetic air film casting process; intensity of the coil current is from 50 to 200A, and frequency is from 15 to 30Hz. The results showed that low-frequency magnetic fields can speed up the flow of liquid metal in sump and the air film stability was undermined, leading to folds and segregations appeared on the ingot surface. Static magnetic field could inhibit the melt to erosion the solidified shell effectively, it's help to improve the speed and pull good surface quality.
引用
收藏
页码：2827 / 2831
页数：5
相关论文
共 50 条
  • [1] Rapid air film continuous casting of aluminum alloy using static magnetic field
    Qu, Fu
    Jiang, Huixue
    Wang, Gaosong
    Zhu, Qingfeng
    Wang, Xiangjie
    Cui, Jianzhong
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2009, 22 (05) : 339 - 344
  • [2] Rapid air film continuous casting of aluminum alloy using static magnetic field
    Fu QU
    ActaMetallurgicaSinica(EnglishLetters), 2009, 22 (05) : 339 - 344
  • [3] EFFECT OF INTERMITTENT HIGH FREQUENCY MAGNETIC FIELD ON INITIAL SOLIDIFICATION IN CONTINUOUS CASTING
    T. J. Li(Dalian University of Technology
    Acta Metallurgica Sinica(English Letters), 1997, (02) : 151 - 156
  • [4] Effect of intermittent high frequency magnetic field on initial solidification in continuous casting
    Li, T.J.
    Sassa, K.
    Asai, S.
    Acta Metallurgica Sinica Series A, Physical Metallurgy & Materials Science, 1997, 10 (02): : 151 - 156
  • [5] Study on Stirring Effect of Spiral Magnetic Field in Continuous Casting of Round Blooms
    Zhang, Xiaobing
    Xu, Changjun
    Lei, Chong
    Wang, Tao
    Lin, Huijie
    Wu, Hongjian
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (01)
  • [6] Numerical estimation of the effect of the magnetic field application on the motion of inclusion in continuous casting of steel
    Li, B
    Tsukihashi, F
    ISIJ INTERNATIONAL, 2003, 43 (06) : 923 - 931
  • [7] Effect of low-frequency magnetic field on macrosegregation of continuous casting aluminum alloys
    Zhang, BJ
    Cui, JZ
    Lu, GM
    MATERIALS LETTERS, 2003, 57 (11) : 1707 - 1711
  • [8] Effect of static magnetic field application on the mass transfer in sequence slab continuous casting process
    Li, B
    Tsukihashi, F
    ISIJ INTERNATIONAL, 2001, 41 (08) : 844 - 850
  • [9] Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Casting Mold With Traveling Magnetic Field
    WANG Hong-dan1
    2.School of Materials and Metallurgy
    JournalofIronandSteelResearch(International), 2010, 17 (09) : 25 - 30
  • [10] Numerical Analysis of Electromagnetic Field and Flow Field in High Casting Speed Slab Continuous Casting Mold With Traveling Magnetic Field
    Wang Hong-dan
    Zhu Miao-yong
    Yu Hai-qi
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (09) : 25 - 30
12345