Hybrid Additive Manufacturing of MS1-H13 Steels via Direct Metal Laser Sintering

被引：0
|
作者：
Shakerin, Sajad [1 ]
Mohammadi, Mohsen [1 ]
机构：
[1] Univ New Brunswick, Marine Addit Mfg Ctr Excellence MAMCE, Fredericton, NB E3B 5A1, Canada
来源：
TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS | 2020年
基金：
加拿大自然科学与工程研究理事会;
关键词：
Hybrid additive manufacturing; Direct metal laser sintering; Maraging steel; Microstructure and interface; MECHANICAL-PROPERTIES; EVOLUTION; PERFORMANCE; BEHAVIOR;
D O I：
10.1007/978-3-030-36296-6_26
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A bimetal steel was additively manufactured by depositing maraging steel powder (MS1) on top of a hot work tool steel H13 through the direct metal laser sintering (DMLS) technique. The microstructure of the substrate-H13 and DMLS-MS1 as well as the interfacial morphology of the hybrid MS1-H13 steel were characterized using optical microscopy (OM) and scanning electron microscopy (SEM). The microhardness tests were carried out to investigate the mechanical behavior of the hybrid MS1-H13 steel. The results showed that no cracks, porosities, or discontinuities were formed at the interface proving a reliable hybrid MS1-H13 steel. In addition, the hybrid additive manufacturing process had no detrimental influence on the substrate-H13. A very sharp interface as narrow as 2 mu m was detected between the DMLS-MS1 and the substrate-H13 hot work tool steel. The microhardness tests across the interface revealed an abrupt increase of the hardness values on the printed side leading to a stronger interface.
引用
收藏
页码：277 / 283
页数：7
相关论文
共 50 条
  • [1] Fracture behaviour of additively manufactured MS1-H13 hybrid hard steels
    Cyr, E.
    Asgari, H.
    Shamsdini, S.
    Purdy, M.
    Hosseinkhani, K.
    Mohammadi, M.
    MATERIALS LETTERS, 2018, 212 : 174 - 177
  • [2] Numerical tools to investigate mechanical and fatigue properties of additively manufactured MS1-H13 hybrid steels
    Ebrahimi, Alireza
    Mohammadi, Mohsen
    ADDITIVE MANUFACTURING, 2018, 23 : 381 - 393
  • [3] Design Principle for Additive Manufacturing: Direct Metal Sintering
    Novak, Regina
    Valjak, Filip
    Bojcetic, Nenad
    Sercer, Mario
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2023, 30 (03): : 937 - 944
  • [4] Rapid manufacturing with direct metal laser sintering
    Lind, JE
    Hanninen, J
    Kotila, J
    Nyrhila, O
    Syvanen, T
    RAPID PROTOTYPING TECHNOLOGIES, 2003, 758 : 17 - 22
  • [5] Laser direct sintering approach for additive manufacturing in flexible electronic
    Mu, Boyu
    Wang, Xuepei
    Zhang, Xiaoshuan
    Xiao, Xinqing
    Results in Engineering, 2022, 13
  • [6] Laser direct sintering approach for additive manufacturing in flexible electronic
    Mu, Boyu
    Wang, Xuepei
    Zhang, Xiaoshuan
    Xiao, Xinqing
    RESULTS IN ENGINEERING, 2022, 13
  • [7] Laser Sintering Control for Metal Additive Manufacturing by PDE Backstepping
    Koga, Shumon
    Krstic, Miroslav
    Beaman, Joseph
    IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2020, 28 (05) : 1928 - 1939
  • [8] Laser Sintering Control for Metal Additive Manufacturing by PDE Backstepping
    Koga, Shumon
    Krstic, Miroslav
    Beaman, Joseph
    2019 IEEE 58TH CONFERENCE ON DECISION AND CONTROL (CDC), 2019, : 1195 - 1200
  • [9] Additive Manufacturing of Compact Manifold-Microchannel Heat Exchangers utilizing Direct Metal Laser Sintering
    Keramati, Hadi
    Battaglia, Fabio
    Arie, Martinus A.
    Singer, Farah
    Ohadi, Michael M.
    PROCEEDINGS OF THE 2019 EIGHTEENTH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2019), 2019, : 423 - 429
  • [10] Application of Direct Metal Laser Sintering for Manufacturing of Robotic Parts
    Cader, Maciej
    Wyszynski, Dominik
    RECENT ADVANCES IN SYSTEMS, CONTROL AND INFORMATION TECHNOLOGY, 2017, 543 : 312 - 326
12345